Improving the Supercritical CO<sub>2</sub> Foaming of Polypropylene by the Addition of Fluoroelastomer as a Nucleation Agent
In this study, a small amount of fluoroelastomer (FKM) was used as a nucleating agent to prepare well-defined microporous PP foam by supercritical CO<sub>2</sub>. It was observed that solid FKM was present as the nanoscale independent phase in PP matrix and the FKM could induce a mass of...
Main Authors: | Chenguang Yang, Quan Zhao, Zhe Xing, Wenli Zhang, Maojiang Zhang, Hairong Tan, Jixiang Wang, Guozhong Wu |
---|---|
Format: | Article |
Language: | English |
Published: |
MDPI AG
2019-02-01
|
Series: | Polymers |
Subjects: | |
Online Access: | https://www.mdpi.com/2073-4360/11/2/226 |
Similar Items
-
Polyetherimide Foams Filled with Low Content of Graphene Nanoplatelets Prepared by scCO<sub>2</sub> Dissolution
by: Hooman Abbasi, et al.
Published: (2019-02-01) -
Fabrication of Poly(butylene succinate)/Carbon Black Nanocomposite Foams with Good Electrical Conductivity and High Strength by a Supercritical CO<sub>2</sub> Foaming Process
by: Zhou Chen, et al.
Published: (2019-11-01) -
The Influence of Nano CaCO<sub>3</sub> on Nucleation and Interface of PP Nano Composite: Matrix Processability and Impact Resistance
by: Meshal Al-Samhan, et al.
Published: (2021-04-01) -
Fabrication of PCL Scaffolds by Supercritical CO<sub>2</sub> Foaming Based on the Combined Effects of Rheological and Crystallization Properties
by: Chaobo Song, et al.
Published: (2020-04-01) -
Sensory Polymeric Foams as a Tool for Improving Sensing Performance of Sensory Polymers
by: Blanca S. Pascual, et al.
Published: (2018-12-01)