Influence of Selective Laser Melting Machine Source on the Dynamic Properties of AlSi10Mg Alloy

Influence of Selective Laser Melting Machine Source on the Dynamic Properties of AlSi10Mg Alloy

Selective laser melting (SLM) AlSi10Mg alloy has been thoroughly investigated in terms of its microstructure and quasi-static properties, owing to its broad industrial applications. However, the effects of the SLM process on the dynamic behavior under impact conditions remain to be established. This...

Full description

Bibliographic Details
Main Authors:	Ben Amir, Shmuel Samuha, Oren Sadot
Format:	Article
Language:	English
Published:	MDPI AG 2019-04-01
Series:	Materials
Subjects:	selective laser melting AlSi10Mg alloy dynamic properties impact crystallographic texture
Online Access:	https://www.mdpi.com/1996-1944/12/7/1143

Similar Items

Microstructure and Properties of AlSi10Mg Powder for Selective Laser Melting
by: TANG Pengjun, et al.
Published: (2018-02-01)

Effects of Platform Pre-Heating and Thermal-Treatment Strategies on Properties of AlSi10Mg Alloy Processed by Selective Laser Melting
by: Riccardo Casati, et al.
Published: (2018-11-01)

Investigation on the Microstructure and Mechanical Properties of CNTs-AlSi10Mg Composites Fabricated by Selective Laser Melting
by: Shixuan Luo, et al.
Published: (2021-02-01)

Failure Analysis of the Tree Column Structures Type AlSi10Mg Alloy Branches Manufactured by Selective Laser Melting
by: Peikang Bai, et al.
Published: (2020-09-01)

Comparative Study of the Metallurgical Quality of Primary and Secondary AlSi10MnMg Aluminium Alloys
by: Asier Bakedano, et al.
Published: (2021-07-01)

Microstructural Characterization of the Anisotropy and Cyclic Deformation Behavior of Selective Laser Melted AlSi10Mg Structures
by: Mustafa Awd, et al.
Published: (2018-10-01)

Study of the Surface and Dimensional Quality of the AlSi10Mg Thin-Wall Components Manufactured by Selective Laser Melting
by: Muhammad Waqas, et al.
Published: (2021-05-01)

On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
by: Francesco Trevisan, et al.
Published: (2017-01-01)

The Effects of Selective Laser Melting Process Parameters on Relative Density of the AlSi10Mg Parts and Suitable Procedures of the Archimedes Method
by: Shigang Bai, et al.
Published: (2019-02-01)

Work Hardening of Heat-Treated AlSi10Mg Alloy Manufactured by Selective Laser Melting: Effects of Layer Thickness and Hatch Spacing
by: Emanuele Ghio, et al.
Published: (2021-08-01)

Performance Consistency of AlSi10Mg Alloy Manufactured by Simulating Multi Laser Beam Selective Laser Melting (SLM): Microstructures and Mechanical Properties
by: Bin Liu, et al.
Published: (2018-11-01)

Relationship between Microstructure Evolution and Tensile Properties of AlSi10Mg Alloys with Varying Mg Content and Solidification Cooling Rates
by: Maressa Gandolfi, et al.
Published: (2021-06-01)

Evolution of Microstructure, Texture and Corrosion Properties of Additively Manufactured AlSi10Mg Alloy Subjected to Equal Channel Angular Pressing (ECAP)
by: Hilšer, O., et al.
Published: (2022)

Corrosion Behavior of AlSi10Mg Alloy Produced by Additive Manufacturing (AM) vs. Its Counterpart Gravity Cast Alloy
by: Avi Leon, et al.
Published: (2016-06-01)

The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys
by: Ahmed H. Maamoun, et al.
Published: (2018-12-01)

Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg
by: Wolfgang Schneller, et al.
Published: (2019-02-01)

Research on the Thermal Behaviour of a Selectively Laser Melted Aluminium Alloy: Simulation and Experiment
by: Zhonghua Li, et al.
Published: (2018-07-01)

Research on Surface Roughness of AlSi10Mg Parts Fabricated by Laser Powder Bed Fusion
by: Bao-Qiang Li, et al.
Published: (2018-07-01)

Additive manufactured versus cast AlSi10Mg alloy: Microstructure and micromechanics
by: S.I. Shakil, et al.
Published: (2021-06-01)

Optimization of AlSi10MgMn Alloy Heat Treatment Process Based on Orthogonal Test and Grey Relational Analysis
by: Fubao Zhang, et al.
Published: (2021-04-01)

Investigation and Optimization of the SLM and WEDM Processes’ Parameters for the AlSi10Mg-Sintered Part
by: Emilia Franczyk, et al.
Published: (2021-01-01)

A Comparative Study of Fatigue Energy Dissipation of Additive Manufactured and Cast AlSi10Mg Alloy
by: Chunxia Yang, et al.
Published: (2021-08-01)

Crack initiation and early propagation behavior of AlSi10Mg(Cu) cast alloy under thermal fatigue
by: ZHOU Hang, et al.
Published: (2019-03-01)

Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting
by: Rustam Baitimerov, et al.
Published: (2018-05-01)

Ultrasonic Peening Treatment Used to Improve Stress Corrosion Resistance of AlSi10Mg Components Fabricated Using Selective Laser Melting
by: Xiaodong Xing, et al.
Published: (2019-01-01)

Phase-field simulations and microstructural analysis of epitaxial growth during rapid solidification of additively manufactured AlSi10Mg alloy
by: Jiwon Park, et al.
Published: (2020-10-01)

Improving ductility of AlSi7Mg alloy by casting-forging process: effect of deformation degree
by: Yongyue Liu, et al.
Published: (2021-09-01)

The Use of Selective Laser Melting to Increase the Performance of AlSi9Cu3Fe Alloy
by: Michaela Fousova, et al.
Published: (2018-10-01)

Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement
by: Davor Stanić, et al.
Published: (2020-12-01)

Microstructure and mechanical properties of nano-WC reinforced AlSi10Mg fabricated by selective laser melting
by: YE Han, et al.
Published: (2020-03-01)

Microstructure and mechanical properties of nano-WC reinforced AlSi10Mg fabricated by selective laser melting
by: YE Han, et al.
Published: (2019-03-01)

Cavitation Erosion Research for AlSi12 Alloy Tested at Different Time Periods
by: Daniel Chirus, et al.
Published: (2013-05-01)

Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-06-01)

Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-07-01)

Directed energy deposition of AlSi10Mg: Single track nonscalability and bulk properties
by: Parnian Kiani, et al.
Published: (2020-09-01)

Effect of (Pr+Ce) Additions on Microstructure and Mechanical Properties of AlSi5Cu1Mg Alloy
by: Miao-Miao Fang, et al.
Published: (2019-05-01)

Process Window for Highly Efficient Laser-Based Powder Bed Fusion of AlSi10Mg with Reduced Pore Formation
by: Artur Leis, et al.
Published: (2021-09-01)

Selective laser melting of high-strength primary AlSi9Cu3 alloy: Processability, microstructure, and mechanical properties
by: J. Fiocchi, et al.
Published: (2020-06-01)

Effect of Platform Temperature and Post-Processing Heat Treatment on the Fatigue Life of Additively Manufactured AlSi7Mg Alloy
by: Luiz Felipe Leitao Martins, et al.
Published: (2021-04-01)

Multiple, comparative heat treatment and aging schedules for controlling the microstructures and mechanical properties of laser powder bed fusion fabricated AlSi10Mg alloy
by: Jorge Merino, et al.
Published: (2021-07-01)