Summary: | On the base of modernized NanoTest 600 Platform 3 indentation method is proposed to determine elastic parameters – Poisson’s ratio and Young’s modulus – of a material while loading in an elastic region. The experiment is based on procedure: lateral surface of indenter tip with the shape of parabolic cylinder penetrates into the specimen. NanoTest 600 was equipped by additional optics, backlight and device for spatial orientation of the specimen. This modernization allows to control the process of the indenter penetration both along its length and from the edges, so that one can observe and measure the width of the contact area and control the depth of the indentation area in a sample material. Mathematical modeling of the indentation process was conducted within the framework of plane theory of elasticity. This required solution of the contact problem on indentation of a rigid indenter with a parabolic shape into an elastic strip coupled with a non-deformable substrate. The fulfilment of condition of zeroing the contact stresses at the edges of the indenter with a known width of the contact area allows to determine the Poisson’s ratio, and condition of static equilibrium of the contact problem helps to find Young’s modulus of a strip material.
|