The method of selecting a foaming agent and its concentration in the production of non-autoclaved hard cellular concrete

The method of selecting a foaming agent and its concentration in the production of non-autoclaved hard cellular concrete

The paper considers the approach to the selection of the foaming agent and its concentration in the production of non-autoclaved hard cellular concrete, consisting in measuring the basic physico-chemical properties and determining the critical concentration of micelle formation.

Bibliographic Details
Main Authors:	Gorbach Pavel, Shcherbin Sergey, Savenkov Andrei
Format:	Article
Language:	English
Published:	EDP Sciences 2018-01-01
Series:	MATEC Web of Conferences
Online Access:	https://doi.org/10.1051/matecconf/201821201004

Similar Items

Sterile effect in foam concrete
by: Gorbach Pavel, et al.
Published: (2018-01-01)

NON-AUTOCLAVE FOAM CONCRETE WITH MINERAL ADDITIVES
by: Екатерина Анатольевна Бартеньева, et al.
Published: (2017-02-01)

Structural and heat-insulating foam concrete of non-autoclaved hardening based on microsilica
by: Baranova Albina, et al.
Published: (2018-01-01)

THE CONSTRUCTION OF THE FUNCTION OF THE ULTIMATE GOAL OF THE TECHNOLOGICAL PROCESS OF NON-AUTOCLAVED FOAM CONCRETE OBTAINING
by: Sergey Fedosov, et al.
Published: (2019-09-01)

Properties of the wall structures made of autoclaved cellular concrete products on the polyurethane foam adhesive
by: A.S. Gorshkov, et al.
Published: (2013-08-01)

INFLUENCE OF WATER-TO-CEMENT RATIO ON AIR ENTRAILMENT IN PRODUCTION OF NON-AUTOCLAVED FOAM CONCRETE USING TURBULENCE CAVITATION TECHNOLOGY
by: Gorshkov Pavel Vladimirovich
Published: (2012-10-01)

PROSPECTS FOR REINFORCED AUTOCLAVED CELLULAR CONCRETE PRODUCTION TECHNOLOGY
by: Lobodenko Evgeniy Aleksandrovich, et al.
Published: (2018-07-01)

Porosity and Mechanical Strength of an Autoclaved Clayey Cellular Concrete
by: P. O. Guglielmi, et al.
Published: (2010-01-01)

Preparation of Autoclaved Foamed Concrete Block from Fly Ash and Carbide Slag
by: Tan Xing, et al.
Published: (2018-01-01)

Preparation of Autoclaved Foamed Concrete Block from Fly Ash and Carbide Slag
by: Tan Xing, et al.
Published: (2018-01-01)

Beautoklavio putbetonio šiluminių techninių savybių tyrimai/Investigation into non-autoclaved foam concrete heat engineering properties
by: Ivan Gnip, et al.
Published: (1996-12-01)

Parameter optimization of the program trajectory of the cellular concrete autoclaving control system
by: Galitskov Stanislav, et al.
Published: (2017-01-01)

Recipe-technological aspects of improving the properties of non-autoclaved aerated concrete
by: Shuisky Anatoliy, et al.
Published: (2017-01-01)

Reinforcement influence on non-autoclave foam cement concrete strength characteristics/Armavimo įtaka putų cementbetonio stiprumo charakteristikoms
by: Marijonas Sinica, et al.
Published: (2000-06-01)

Behaviour of low density autoclaved aerated concrete masonry under concentrated loads
by: Bright, Norman
Published: (2006)

Investigation of the Thermal and Hydrolytic Degradation of Polylactide during Autoclave Foaming
by: Julia Dreier, et al.
Published: (2021-08-01)

Influence of modification of the solid component on the properties of non-autoclaved aerated concrete
by: Eugene Krylov, et al.
Published: (2019-06-01)

Actual thermophysical characteristics of autoclaved aerated concrete
by: N. Vatin, et al.
Published: (2020-06-01)

Autoclaved Curing Process of Reactive Powder Concrete
by: Shu-Lin Liao, et al.
Published: (2006)

Long-term Investigation on the Microstructures of the Autoclaved Concrete
by: Joe chu, et al.
Published: (1993)

Validation of Selected Non-Destructive Methods for Determining the Compressive Strength of Masonry Units Made of Autoclaved Aerated Concrete
by: Radosław Jasiński, et al.
Published: (2019-01-01)

Effect of caustic soda on the intensity of gassing in the production of non-autoclaved aerated concrete
by: Halyushev Alexander, et al.
Published: (2017-01-01)

Simulation of non-stationary heat transfer processes in autoclaved aerated concrete-walls
by: A.S. Gorshkov, et al.
Published: (2014-12-01)

Combustibility of lightweight foam concrete based on natural protein foaming agent
by: Rybakov Vladimir, et al.
Published: (2021-01-01)

NON-AUTOCLAVE SILICATE BRICK
by: V. N. Yaglov, et al.
Published: (2015-05-01)

Sorption measurements of autoclaved aerated concretes diffusion coefficient
by: Garbalińska Halina, et al.
Published: (2018-01-01)

Study on the Aging Effects of Regularly Curing and Autoclaved Concretes
by: Shih-ching Huang, et al.
Published: (1993)

The use of grinded andesite-sand and foaming-agent to improve the porosity of foam-concrete
by: Erwin Rommel, et al.
Published: (2018-01-01)

Settlement determination of operating moisture of autoclaved aerated concrete in different climatic zones
by: Pastushkov Pavel Pavlovich, et al.

Effective additive for foam concrete
by: Belov Vladimir, et al.
Published: (2020-01-01)

Analysis of autoclaved aerated concrete (AAC) blocks with reference to its potential and sustainability
by: Mohammad Arif Kamal
Published: (2020-07-01)

The improvement of thermal characteristics of autoclave aerated concrete for energy efficient high-rise buildings application
by: Khavanov Pavel, et al.
Published: (2018-01-01)

Investigations of Forming Mixture Parameters of Autoclaved Aerated Concrete with Nanoadditives
by: Lina LEKŪNAITĖ, et al.
Published: (2012-09-01)

PREPARATION OF ULTRA-LOW VOLUME WEIGHT AUTOCLAVED AERATED CONCRETE
by: Ondrej Koutny, et al.
Published: (2016-12-01)

THE INFLUENCE OF A HALLOYSITE ADDITIVE ON THE PERFORMANCE OF AUTOCLAVED AERATED CONCRETE
by: Z. Owsiak, et al.
Published: (2015-03-01)

Design provisions for autoclaved aerated concrete (AAC) structural systems
by: Tanner, Jennifer Elaine
Published: (2011)

Effect of Autoclaved Curing Process on Reactive Powder Concrete Behavipr
by: Han-Hao Chen, et al.
Published: (2007)

Sustainable Management of Autoclaved Aerated Concrete Wastes in Gypsum Composites
by: Fabio Iucolano, et al.
Published: (2021-04-01)

Investigation of sorption properties in crushed autoclaved aerated concrete waste
by: Marijonas Sinica, et al.
Published: (2012-03-01)

Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevant Parameters for Autoclave Foaming of Standard Polylactide (PLA)
by: Tobias Standau, et al.
Published: (2020-03-01)