Design and experiments of double-switch electromagnetic pulse welding system
Limited by the current capacity of the discharge switch, the amplitude of the circuit discharge pulse current of electromagnetic pulse welding (EMPW) system is at a relatively low level, which greatly limits the application range of the EMPW technology. In this paper, the trigger vacuum switch (TVS)...
Main Authors: | Zhigang Liao, Chengxiang Li, Jian Du, Yan Zhou, Xianmin Wang, Xin Shi |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier
2020-12-01
|
Series: | Energy Reports |
Subjects: | |
Online Access: | http://www.sciencedirect.com/science/article/pii/S235248472031516X |
Similar Items
-
Fracture Characteristics and Analysis in Dissimilar Cu-Al Alloy Joints Formed via Electromagnetic Pulse Welding
by: Puquan Wang, et al.
Published: (2019-10-01) -
Electromagnetic Pulse Welding of Tubular Products: Influence of Process Parameters and Workpiece Geometry on the Joint Characteristics and Investigation of Suitable Support Systems for the Target Tube
by: Koen Faes, et al.
Published: (2019-05-01) -
The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate Glazing
by: Shanwen Zhang, et al.
Published: (2019-06-01) -
Formation Investigation of Intermetallic Compounds of Thick Plate Al/Mg Alloys Joint by Friction Stir Welding
by: Yang Xu, et al.
Published: (2019-08-01) -
Effects of Pulse Parameters on Weld Microstructure and Mechanical Properties of Extra Pulse Current Aided Laser Welded 2219 Aluminum Alloy Joints
by: Xinge Zhang, et al.
Published: (2017-09-01)