Inductance optimization of miniature Broadband transformers with racetrack shaped ferrite cores for Ethernet applications

• Main Authors: David Bowen, Charles Krafft, Isaak D. Mayergoyz
• Format: Article
• Language: English
• Published: AIP Publishing LLC 2017-05-01
• Series: AIP Advances
• Online Access: http://dx.doi.org/10.1063/1.4977723

There is strong commercial interest in the ability to fabricate the windings of traditional miniature wire-wound inductive circuit components, such as Ethernet transformers, lithographically. For greater inductance devices, thick cores are required, making the process of embedding the ferrite material within circuit board one of few options for lithographic winding fabrication. In this paper, a non-traditional core shape, suitable for embedding in circuit board, is examined analytically and experimentally; the racetrack shape is two halves of a toroid connected by straight legs. With regard to the high inductance requirements for Ethernet applications (350μH), the racetrack transformer inductance is analytically optimized, determining the optimal physical dimensions. Two sizes of racetrack-core transformers were fabricated and measured. The measured inductance was in reasonable agreement with the analytical prediction, though large variations in material permeability are expected from the mechanical processing of the ferrite. Some of the experimental transformers were observed to satisfy the Ethernet inductance requirement.