Selection and calculation of traction elements of the elevator lifting mechanism

• Main Authors: Vitchuk P.V., Reykhert N.D., Vitchuk N.A.
• Format: Article
• Language: deu
• Published: Academician I.G. Petrovskii Bryansk State University 2021-09-01
• Series: Naučno-Tehničeskij Vestnik Brânskogo Gosudarstvennogo Universiteta
• Subjects: lift; lifting mechanism; elevator drive; steel rope; traction element.
• Online Access: https://ntv-brgu.ru/wp-content/arhiv/2021-N3/2021-03-01.pdf

The correct choice of elements of the elevator lifting mechanism and their parameters ensures its reliability, durability, energy and economic efficiency. The paper contains recommendations for the selection of the traction elements of the elevator lifting mechanism and the sequence of determining their parameters based on a multivariate calculation. The purpose of the proposed sequence is to obtain the most rational parameters of the traction elements of the elevator lifting mechanism. The initial data for the calculation are the lifting capacity of the elevator, the nominal speed of movement, the height of the lift of the car. It is also necessary to consider the purpose of the elevator. At the first stage of the calculation, the masses of the cab and the counterweight are determined. In this case, the existing data on analogue lifts should be used. In the absence of such data, the approximate dependences proposed by the authors of the article can be used. At the second stage, the kinematic scheme of the elevator is selected. At the third stage, the type of traction element is selected. On the basis of domestic and foreign experience in elevator engineering and well-known literature, recommendations are formulated for choosing the type of traction element. The final stage is a multivariate calculation of traction elements. It is proposed to evaluate the calculation results taking into account the minimum value of the safety factor in accordance with the EN 81-1: 1998 standard. The calculation of the traction elements considered in the work is only a small part of the process of determining the optimal parameters of the elements of the elevator lifting mechanism. At the same time, already at this stage, variability is introduced, which makes the calculation quite laborious to perform it manually. Obviously, a multivariate calculation method that allows you to analyze many different combinations of parameters of the elements of the elevator lifting mechanism and choose the optimal ones is impossible without the use of a computer.