PREVENTIVE MAINTENANCE USING RELIABILITY CENTRED MAINTENANCE (RCM): A CASE STUDY OF A FERROCHROME MANUFACTURING COMPANY

• Main Authors: S. Fore, A. Msipha
• Format: Article
• Language: English
• Published: Stellenbosch University 2012-01-01
• Series: South African Journal of Industrial Engineering
• Online Access: http://sajie.journals.ac.za/pub/article/view/78
• ISSN: 1012-277X; 2224-7890

<p>ENGLISH ABSTRACT: High productivity in industry requires high equipment reliability and plant availability. The aim of this paper is to illustrate the management of preventive maintenance by application of the Reliability Centred Maintenance (RCM), targeting a ferrochrome processing plant. The research points out that preventive maintenance is often neglected, affecting process continuity, and thus compromising product quality due to drops and fluctuations in operating temperature. These breakdowns tend to be frequent and longer, thus affecting production targets. Start-up failures are also experienced after carrying out maintenance. The maintenance department is affected by the unpredictability of the equipment’s operational patterns, and faces challenges in coming up with an effective spare part inventory management regime. This leads to crisis management, thereby increasing the direct cost of maintenance. RCM is used to create a cost-effective preventive maintenance strategy to address the dominant causes of equipment failure. The result is a maintenance programme that focuses scarce economic resources on those items that would cause the most disruption if they were to fail, and thereby increases production.</p><p>AFRIKAANSE OPSOMMING: Industriële produktiwiteit word ten nouste beïnvloed deur uitnemende betroubaarheid en beskikbaarheid van aanlegtoerusting en vervaardigingstelsels. Hierdie navorsing is toegespits op die bestuur van voorkomende instandhouding (VI) met betroubaarheidsgedrewe instandhouding (BGI) by ‘n ferrochroomaanleg. Klem word daarop gelê dat VI dikwels geïgnoreer word wat daartoe lei dat produkgehalte verswak. Soos produksieonderbrekings toeneem, word vervaardigingsdoelwitte nie bereik nie vir verskeie redes. Die onderneming se instandhoudingsafdeling is gevolglik nie daartoe instaat om instandhouding doelmatig te verrig nie. Instandhoudingskoste neem ook toe. <br /> BGI voorsien ‘n koste-effektiewe instandhoudingstrategie wat fokus op mislukkingsbelangrikheid waar fondse bestee moet word vir optimum aanlegbeskikbaarheid.</p>