Experimental Study of Correlation of Mechanical Properties of Al-Si Casts Produced by Pressure Die Casting with Si/Fe/Mn Content and Their Mutual Mass Relations

Experimental Study of Correlation of Mechanical Properties of Al-Si Casts Produced by Pressure Die Casting with Si/Fe/Mn Content and Their Mutual Mass Relations

Bibliographic Details
Main Authors:	Marcel Fedak, Miroslav Rimar, Ivan Corny, Stefan Kuna
Format:	Article
Language:	English
Published:	Hindawi Limited 2013-01-01
Series:	Advances in Materials Science and Engineering
Online Access:	http://dx.doi.org/10.1155/2013/585714

Similar Items

Adaptive Rejection Filter for the Drives Stabilization of Pressure Die Casting Machines
by: Miroslav Rimar, et al.
Published: (2014-05-01)

Primary Crystals of AlfeMnSi Intermetallics in the Cast AlSi Alloys
by: Warmuzek M.
Published: (2017-09-01)

Influence of Gating System Parameters of Die-Cast Molds on Properties of Al-Si Castings
by: Štefan Gašpár, et al.
Published: (2021-07-01)

Microstructure and Mechanical Properties of High Vacuum Die-Cast AlSiMgMn Alloys at as-Cast and T6-Treated Conditions
by: Fei Liu, et al.
Published: (2019-06-01)

Using gel casting to produce FeSiCr alloy powder molding chokes
by: Chi-HeChen, et al.
Published: (2019)

Evaluation of Corrosion Behavior on Crept AlSi10MnMg (AA365) Alloy Produced by High-Pressure Die-Casting (HPDC)
by: Seonghwan Park, et al.
Published: (2021-07-01)

Microstructure evolution and mechanical properties of new die-cast Al-Si-Mg-Mn alloys
by: Qing Cai, et al.
Published: (2020-02-01)

Quench Sensitivity and Phase Transformation Kinetics of AlSi7MnMg High Pressure Vacuum Die Casting
by: Liu Mengyun, et al.
Published: (2020-01-01)

Aluminium Foam and Magnesium Compound Casting Produced by High-Pressure Die Casting
by: Iban Vicario, et al.
Published: (2016-01-01)

Effect of boron on microstructure evolution and properties of wear-resistant cast Fe–Si–Mn–Cr–B alloy
by: Zhang Changle, et al.
Published: (2020-05-01)

INFLUENCE OF Mn, Si, Al ON TRIBOTECHNICAL CHARACTERISTICS OF CAST BORON-CONTAINING MATERIAL
by: N. F. Nevar, et al.
Published: (2009-08-01)

Residual stresses in castings produced by press die casting technology
by: D. Novoselović, et al.
Published: (2015-01-01)

Pulse width modulation modeling for efficient pneumatic artificial muscle control
by: Miroslav Rimar, et al.
Published: (2019-12-01)

Study on the microstructure and mechanical properties of medium carbon Cr-Si-Mn-Mo-V steel for cast inserted dies
by: HAO Xiao-yan, et al.
Published: (2005-11-01)

Synergistic effects of composition and heat treatment on microstructure and properties of vacuum die cast Al-Si-Mg-Mn alloys
by: Jun-jie Xu, et al.
Published: (2018-03-01)

Lost foam casting of LM6-Al-Si cast alloy
by: A. Asmael, Mohammed Bsher
Published: (2009)

The Influence of Returnable Material on Internal Homogeneity of the High-Pressure Die-Cast AlSi9Cu3(Fe) Alloy
by: Marek Matejka, et al.
Published: (2021-07-01)

Thixoforming and Rheo-Die-Casting of A356/SiC Composite
by: Sukangkana Talangkun, et al.
Published: (2020-02-01)

Modeling Precipitation Hardening and Yield Strength in Cast Al-Si-Mg-Mn Alloys
by: Emre Cinkilic, et al.
Published: (2020-10-01)

Research and development of an as-cast Fe-30Mn-3C-1Si alloy with low magnetic permeability and high hardness
by: Kun-Yu Shih, et al.
Published: (2015)

Influence of Ni in high Fe containing recyclable Al-Si cast alloys
by: C.B. Basak, et al.
Published: (2019-11-01)

Effect of holding pressure on density and cooling rate of cast Al-Si alloy during additive pressure casting
by: Zhen Fan, et al.
Published: (2019-11-01)

Distribution of Reinforcing Particles in the Pressure Die Cast AlSi11/20% Sic Composite
by: Pasieka A., et al.
Published: (2014-06-01)

Hypoeutectic Al-Si Alloy Doped with Chromium, Tungsten and Molybdenum Designated for Pressure Die Casting
by: Szymczak T., et al.
Published: (2017-09-01)

Characteristics of Al-Si Alloys with High Melting Point Elements for High Pressure Die Casting
by: Tomasz Szymczak, et al.
Published: (2020-10-01)

Ce-Bearing FeSi Alloy Inoculation of Electrically Melted, Low Sulphur Grey Cast Irons for Thin Wall Castings
by: Irina Varvara Balkan, et al.
Published: (2021-07-01)

Effect of Casting Modulus on the Fluidity of Gravity Cast Al-Si(Mg) Alloys
by: L.G.Jaw, et al.
Published: (2000)

SELECTION OF OPTIMAL AL–SI COMBINATIONS IN CAST IRON FOR CASTINGS FOR ENGINEERING PURPOSES
by: Liliia Frolova, et al.
Published: (2021-03-01)

The effect of vacuum degree on the porosity and mechanical properties of die cast AlSi9Cu3(Fe) alloy
by: Péter Szalva, et al.
Published: (2018-11-01)

Modification of Al-Si-Cu cast alloy
by: Farkašová Mária, et al.
Published: (2013-01-01)

Development of Fe-Co-Cr-Mn-Ni-C high entropy cast iron (HE cast iron) available for casting in air atmosphere
by: Takeshi Nagase, et al.
Published: (2019-12-01)

Local Squeezing Casting Influence on the Compactness of AlSi10Mg Alloy Castings
by: Brodarac, Z., et al.
Published: (2007-01-01)

Comparative study on wear behavior of as cast and spray cast hypereutectic Al-Si alloy
by: Goudar Dayanand M., et al.
Published: (2018-08-01)

Material properties of Al-Si-Cu aluminium alloy produced by the rotational cast technology
by: Muhammad Syahid, et al.
Published: (2017-03-01)

On the characterization of microstructure and fracture in a high-pressure die-casting Al-10 wt%Si alloy
by: Xiangyi Jiao, et al.
Published: (2020-04-01)

Materials on dies for pressure die casting
by: E. Ragan, et al.
Published: (2012-01-01)

Influence of heat treatment on microstructure and tensile properties of a cast Al-Cu-Si-Mn alloy
by: Liu Zhixue, et al.
Published: (2013-11-01)

Influence of casting speed on fabricating Al-1%Mn and Al-10%Si alloy clad slab
by: Yu Yingshui, et al.
Published: (2017-05-01)

Gating system optimization of high pressure die casting thin-wall AlSi10MnMg longitudinal loadbearing beam based on numerical simulation
by: Xu Zhao, et al.
Published: (2018-11-01)

Investigation of Mechanical Properties of Al7Si/ SiC and Al7SiMg/SiC Composites Produced by Semi Solid Stir Casting Technique
by: Sulardjaka, et al.
Published: (2018-01-01)

Cannot write session to /tmp/vufind_sessions/sess_hsemrupad82hhn3mr2so9nfr6k