Cavitation Erosion Research for AlSi12 Alloy Tested at Different Time Periods
This paper presents cavitation erosion research for 2 batch of an AlSi12 alloy. The tests were made on a cavitation stand in laboratory, using the stationary specimen method. This alloy is not subject to cavitation, but the experimental research highlight the behavior of AlSi12 alloy when the ti...
Main Authors: | Daniel Chirus, Marian-Dumitru Nedeloni |
---|---|
Format: | Article |
Language: | English |
Published: |
Eftimie Murgu University of Resita
2013-05-01
|
Series: | Analele Universităţii "Eftimie Murgu" Reşiţa: Fascicola I, Inginerie |
Subjects: | |
Online Access: | http://anale-ing.uem.ro/2013/6.pdf |
Similar Items
-
Influence of Ultrasound Treatment on Cavitation Erosion Resistance of AlSi7 Alloy
by: Annalisa Pola, et al.
Published: (2017-03-01) -
Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting
by: Rustam Baitimerov, et al.
Published: (2018-05-01) -
Creation of AlSi12 Alloy Coating by Centrifugal Induction Surfacing with the Addition of Low-Melting Metals
by: Aleksander I. Komarov, et al.
Published: (2021-06-01) -
AlSi12 Alaşımından Üretilen Kompresör Silindir Kapağında Abrasif Aşınma Davranışının İncelenmesi
by: Samet Aksoy, et al.
Published: (2017-10-01) -
AlSi12 Alaşımından Üretilen Kompresör Silindir Kapağında Abrasif Aşınma Davranışının İncelenmesi
by: Samet Aksoy, et al.
Published: (2017-01-01)