Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo<sub>0.2</sub> High Entropy Alloy
A CoCrFeNiMo<sub>0.2</sub> high entropy alloy (HEA) was prepared through powder metallurgy (P/M) process. The effects of annealing on microstructural evolution and mechanical properties of P/M HEAs were investigated. The results show that the P/M HEA exhibit a metastable FCC single-phase...
Main Authors: | , , , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
MDPI AG
2019-04-01
|
Series: | Entropy |
Subjects: | |
Online Access: | https://www.mdpi.com/1099-4300/21/5/448 |
id |
doaj-8894bf36fb2c41cb82b34dba7d1c1168 |
---|---|
record_format |
Article |
spelling |
doaj-8894bf36fb2c41cb82b34dba7d1c11682020-11-24T21:50:47ZengMDPI AGEntropy1099-43002019-04-0121544810.3390/e21050448e21050448Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo<sub>0.2</sub> High Entropy AlloyCui Zhang0Bin Liu1Yong Liu2Qihong Fang3Wenmin Guo4Hu Yang5State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, ChinaState Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, ChinaState Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, ChinaCollege of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, ChinaState Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, ChinaYuanmeng Precision Technology (Shenzhen) Institute, Shenzhen 518055, ChinaA CoCrFeNiMo<sub>0.2</sub> high entropy alloy (HEA) was prepared through powder metallurgy (P/M) process. The effects of annealing on microstructural evolution and mechanical properties of P/M HEAs were investigated. The results show that the P/M HEA exhibit a metastable FCC single-phase structure. Subsequently, annealing causes precipitation in the grains and at the grain boundaries simultaneously. As the temperature increases, the size of the precipitates grows, while the content of the precipitates tends to increase gradually first, and then decrease as the annealing temperature goes up to 1000 °C. As the annealing time is prolonged, the size and content of the precipitates gradually increases, eventually reaching a saturated stable value. The mechanical properties of the annealed alloys have a significant correspondence with the precipitation behavior. The larger the volume fraction and the size of the precipitates, the higher the strength and the lower the plasticity of the HEA. The CoCrFeNiMo<sub>0.2</sub> high entropy alloy, which annealed at 800 °C for 72 h, exhibited the most excellent mechanical properties with the ultimate tensile strength of about 850 MPa and an elongation of about 30%. Nearly all of the annealed HEAs exhibit good strength−ductility combinations due to the significant precipitation enhancement and nanotwinning. The separation of the coarse precipitation phase and the matrix during the deformation process is the main reason for the formation of micropores. Formation of large volume fraction of micropores results in a decrease in the plasticity of the alloy.https://www.mdpi.com/1099-4300/21/5/448powder metallurgyhigh entropy alloymicrostructureprecipitation strengtheningmechanical properties |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Cui Zhang Bin Liu Yong Liu Qihong Fang Wenmin Guo Hu Yang |
spellingShingle |
Cui Zhang Bin Liu Yong Liu Qihong Fang Wenmin Guo Hu Yang Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo<sub>0.2</sub> High Entropy Alloy Entropy powder metallurgy high entropy alloy microstructure precipitation strengthening mechanical properties |
author_facet |
Cui Zhang Bin Liu Yong Liu Qihong Fang Wenmin Guo Hu Yang |
author_sort |
Cui Zhang |
title |
Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo<sub>0.2</sub> High Entropy Alloy |
title_short |
Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo<sub>0.2</sub> High Entropy Alloy |
title_full |
Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo<sub>0.2</sub> High Entropy Alloy |
title_fullStr |
Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo<sub>0.2</sub> High Entropy Alloy |
title_full_unstemmed |
Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo<sub>0.2</sub> High Entropy Alloy |
title_sort |
effects of annealing on microstructure and mechanical properties of metastable powder metallurgy cocrfenimo<sub>0.2</sub> high entropy alloy |
publisher |
MDPI AG |
series |
Entropy |
issn |
1099-4300 |
publishDate |
2019-04-01 |
description |
A CoCrFeNiMo<sub>0.2</sub> high entropy alloy (HEA) was prepared through powder metallurgy (P/M) process. The effects of annealing on microstructural evolution and mechanical properties of P/M HEAs were investigated. The results show that the P/M HEA exhibit a metastable FCC single-phase structure. Subsequently, annealing causes precipitation in the grains and at the grain boundaries simultaneously. As the temperature increases, the size of the precipitates grows, while the content of the precipitates tends to increase gradually first, and then decrease as the annealing temperature goes up to 1000 °C. As the annealing time is prolonged, the size and content of the precipitates gradually increases, eventually reaching a saturated stable value. The mechanical properties of the annealed alloys have a significant correspondence with the precipitation behavior. The larger the volume fraction and the size of the precipitates, the higher the strength and the lower the plasticity of the HEA. The CoCrFeNiMo<sub>0.2</sub> high entropy alloy, which annealed at 800 °C for 72 h, exhibited the most excellent mechanical properties with the ultimate tensile strength of about 850 MPa and an elongation of about 30%. Nearly all of the annealed HEAs exhibit good strength−ductility combinations due to the significant precipitation enhancement and nanotwinning. The separation of the coarse precipitation phase and the matrix during the deformation process is the main reason for the formation of micropores. Formation of large volume fraction of micropores results in a decrease in the plasticity of the alloy. |
topic |
powder metallurgy high entropy alloy microstructure precipitation strengthening mechanical properties |
url |
https://www.mdpi.com/1099-4300/21/5/448 |
work_keys_str_mv |
AT cuizhang effectsofannealingonmicrostructureandmechanicalpropertiesofmetastablepowdermetallurgycocrfenimosub02subhighentropyalloy AT binliu effectsofannealingonmicrostructureandmechanicalpropertiesofmetastablepowdermetallurgycocrfenimosub02subhighentropyalloy AT yongliu effectsofannealingonmicrostructureandmechanicalpropertiesofmetastablepowdermetallurgycocrfenimosub02subhighentropyalloy AT qihongfang effectsofannealingonmicrostructureandmechanicalpropertiesofmetastablepowdermetallurgycocrfenimosub02subhighentropyalloy AT wenminguo effectsofannealingonmicrostructureandmechanicalpropertiesofmetastablepowdermetallurgycocrfenimosub02subhighentropyalloy AT huyang effectsofannealingonmicrostructureandmechanicalpropertiesofmetastablepowdermetallurgycocrfenimosub02subhighentropyalloy |
_version_ |
1725881613953269760 |