Investigation of improving wear performance of hypereutectic 15%Cr-2%Mo white irons

Investigation of improving wear performance of hypereutectic 15%Cr-2%Mo white irons

This study aimed at optimizing impact toughness and abrasion wear resistance of 15%Cr-2%Mo hypereutectic abrasion-resistant white irons. The effects of dynamic solidification, niobium addition, combined action of them and heat treatment have been investigated. Investigations were performed by means...

Full description

Bibliographic Details
Main Authors:	R. Reda, A. Nofal, Kh. Ibrahim
Format:	Article
Language:	English
Published:	Foundry Journal Agency 2010-11-01
Series:	China Foundry
Subjects:	hypereutectic Cr-Mo white iron dynamic solidification Nb combined action heat treatment impact toughness fractography wear resistance worn surface
Online Access:	http://www.foundryworld.com/uploadfile/201012953225653.pdf

Similar Items

Influence of Laser Welding Speed on the Morphology and Phases Occurring in Spray-Compacted Hypereutectic Al-Si-Alloys
by: Thomas Gietzelt, et al.
Published: (2016-11-01)

Controlling Segregation Behavior of Primary Si in Hypereutectic Al-Si Alloy by Electromagnetic Stirring
by: Qingchuan Zou, et al.
Published: (2020-08-01)

Modeling and Simulation of the Gray-to-White Transition during Solidification of a Hypereutectic Gray Cast Iron: Application to a Stub-to-Carbon Connection Used in Smelting Processes
by: Alejandro Urrutia, et al.
Published: (2017-12-01)

Friction and wear behaviour of hypereutectic Al-Si alloy/steel tribopair under dry and lubricated conditions
by: Parveen Kumar, et al.
Published: (2017-12-01)

In Vitro Bioactivity and Cell Biocompatibility of a Hypereutectic Bioceramic
by: Patricia Mazón, et al.
Published: (2019-03-01)

Wear Morphology on the Surfaces of CoCrMo Unicompartmental Knee Joint Endoprostheses as Elements of Metal–Metal Friction Nodes
by: Arkadiusz Szarek, et al.
Published: (2020-06-01)

Effects of P+Cr complex modification and solidification conditions on microstructure of hypereutectic Al-Si alloys by wedge-shaped copper mould casting
by: Zhang Haitao, et al.
Published: (2014-11-01)

Effect of partial remelting time on the initial carbide in semisolid structure of hypereutectic hih Cr cast iron
by: Zhifu HUANG, et al.
Published: (2004-11-01)

Effect of Mn addition on Fe-rich intermetallics morphology and dry sliding wear investigation of hypereutectic Al-17.5%Si alloys
by: Cyrus Bidmeshki, et al.
Published: (2016-07-01)

Effect of Applied Cathodic Potential on Friction and Wear Behavior of CoCrMo Alloy in NaCl Solution
by: Yong Sun, et al.
Published: (2020-11-01)

Quantitative phase-field simulation of the entire solidification process in one hypereutectic Al–Si alloy considering the effect of latent heat
by: Kai Wang, et al.
Published: (2021-06-01)

TiN/NbN Nanoscale Multilayer Coatings Deposited by High Power Impulse Magnetron Sputtering to Protect Medical-Grade CoCrMo Alloys
by: Arunprabhu Arunachalam Sugumaran, et al.
Published: (2021-07-01)

Microscopical Characterization of Cast Hypereutectic Al-Si Alloys Reinforced with Graphene Nanosheets
by: A. S. Alghamdi, et al.
Published: (2018-02-01)

Formation mechanism of ultrafine M7C3 carbide in a hypereutectic Fe-25Cr-4C-0.5Ti-0.5Nb-0.2N-2LaAlO3 hardfacing alloy layer
by: Jibo Wang, et al.
Published: (2020-07-01)

The Influence of Microstructure on Abrasive Wear Micro-Mechanisms of the Claddings Produced by Welding Used in Agricultural Soil
by: Aleksandra Królicka, et al.
Published: (2020-04-01)

Effect of Ultrasonic Treatment on the Solidification Microstructure of Die-Cast 35CrMo Steel
by: Gen Liang, et al.
Published: (2016-10-01)

CRYOGENIC BURNISHING OF Co-Cr-Mo BIOMEDICAL ALLOY FOR ENHANCED SURFACE INTEGRITY AND IMPROVED WEAR PERFORMANCE
by: Yang, Shu
Published: (2012)

The Effects of Mo and Nb on the Microstructures and Properties of CrFeCoNi(Nb,Mo) Alloys
by: Chun-Huei Tsau, et al.
Published: (2018-08-01)

Effect of cooling rate during solidification on the hard phases of M<sub>23</sub>C<sub>6</sub>-type of cast CoCrMo alloy
by: M. Alvarez-Vera, et al.
Published: (2016-07-01)

Mechanical behavior and microstructure of hypereutectic high chromium cast iron: the combined effects of tungsten, manganese and molybdenum additions
by: Ping Li, et al.
Published: (2020-05-01)

TRIBOLOGICAL BEHAVIOR OF 42CrMo4 STEEL NITRIDED BY PLASMA
by: Chahinez Saied, et al.
Published: (2015-09-01)

Evaluation of Hardness, Sliding Wear and Strength of a Hypoeutectic White Iron with 25%Cr after Heat Treatments
by: Alejandro González-Pociño, et al.
Published: (2021-06-01)

Effect of mixing rate and temperature on primary Si phase of hypereutectic Al-20Si alloy during controlled diffusion solidification (CDS) process
by: Yuan-dong Li, et al.
Published: (2015-05-01)

Studying of properties and microstructure of 30 CrMnV9 steel on wear resistance
by: A. Z. Issagulov, et al.
Published: (2019-01-01)

Crystallographic orientation-spray formed hypereutectic aluminium-silicon alloys
by: Hamilta de Oliveira Santos, et al.
Published: (2005-06-01)

Effects of ZnS modification on primary Si in hypereutectic Al-Si alloy
by: Cheng-dong Li, et al.
Published: (2017-03-01)

NiAl-Cr-Mo Medium Entropy Alloys: Microstructural Verification, Solidification Considerations, and Sliding Wear Response
by: Christina Mathiou, et al.
Published: (2020-08-01)

Modification influence of mischmetal on fractography fracture of G17CrMo5-5 cast steel samples after the three-point bending test
by: J. Kasińska
Published: (2016-10-01)

Effects of Deep Cryogenic Treatment on Wear Resistance and Structure of GB 35CrMoV Steel
by: Yifeng Yao, et al.
Published: (2018-06-01)

Phase formation and thermal stability of amorphous ZrNbCrMo thin films
by: Maciej Kaplan, et al.
Published: (2021-03-01)

Microstructural Analysis and Tribological Behavior of AMDRY 1371 (Mo–NiCrFeBSiC) Atmospheric Plasma Spray Deposited Thin Coatings
by: Cornelia Cîrlan Paleu, et al.
Published: (2020-12-01)

The Tribological Performance of CrMoN/MoS2 Solid Lubrication Coating on a Piston Ring
by: Yuelan Di, et al.
Published: (2017-05-01)

Reductions of Intergranular Corrosion Resistance and Wear Resistance in a Ni-Cr-Mo-Based Superalloy by Aging-Treatment-Induced Precipitation
by: Pengyan Zhang, et al.
Published: (2021-08-01)

Wear and Corrosion Resistance of CoCrFeNiSiMoW Medium-Entropy Alloy Coatings on Q235 Steel
by: Qingxian Hu, et al.
Published: (2021-08-01)

Tribological Performance of CoCrMo Alloys with Boron Additions in As-Cast and Heat-Treated Conditions
by: Marco A. L. Hernandez-Rodriguez, et al.
Published: (2021-02-01)

Microstructure and wear resistance of high chromium cast iron containing niobium
by: Zhang Zhiguo, et al.
Published: (2014-05-01)

Improvement of Impact Toughness and Abrasion Resistance of a 3C-25Cr-0.5Mo Alloy Using a Design of Experiment Statistical Technique: Microstructural Correlations after Heat Treatments
by: Alejandro González-Pociño, et al.
Published: (2021-04-01)

Effects of Nb/Ti additions and heat treatment on the microstructure evolution and hardness of as-cast and directionally solidified NiAl–Cr(Mo) alloy
by: Zhao Shang, et al.
Published: (2021-01-01)

Stress Relaxation Behavior of Cavitation-Processed Cr–Mo Steel and Ni–Cr–Mo Steel
by: Kumiko Tanaka, et al.
Published: (2019-01-01)

Effects of Temperature on the Fretting Wear Behavior of 2.25Cr-1Mo Tubes against Gr5C12 Rods
by: Xu-Dong Chen, et al.
Published: (2020-07-01)