Experiment Comparison between Engineering Acid Dew Point and Thermodynamic Acid Dew Point

• Main Authors: Song Jinghui, Yuan Hui, Deng Jianhua
• Format: Article
• Language: English
• Published: EDP Sciences 2018-01-01
• Series: E3S Web of Conferences
• Online Access: https://doi.org/10.1051/e3sconf/20183804008

in order to realize the accurate prediction of acid dew point, a set of measurement system of acid dew point for the flue gas flue gas in the tail of the boiler was designed and built, And measured at the outlet of an air preheater of a power plant of 1 000 MW, The results show that: Under the same conditions, with the test temperature decreases, Nu of heat transfer tubes, fouling and corrosion of pipe wall and corrosion pieces gradually deepened. Then, the measured acid dew point is compared with the acid dew point obtained by using the existing empirical formula under the same coal type. The dew point of engineering acid is usually about 40 ℃ lower than the dew point of thermodynamic acid because of the coupling effect of fouling on the acid liquid, which can better reflect the actual operation of flue gas in engineering and has certain theoretical guidance for the design and operation of deep waste heat utilization system significance.