Spark Plasma Sintering of Dielectric Ceramics Zr0.8Sn0.2TiO4
<p>Zirconium-tin titanate ceramics (Zr,Sn)TiO<sub>4</sub> was prepared by spark plasma sintering (SPS) technique. Resulting samples, low-height cylinders, were subjected to microstructural observations, immersion measurements of density and porosity and X-ray diffraction phase anal...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Kaunas University of Technology
2016-09-01
|
| Series: | Medžiagotyra |
| Subjects: | |
| Online Access: | http://matsc.ktu.lt/index.php/MatSc/article/view/8767 |
| Summary: | <p>Zirconium-tin titanate ceramics (Zr,Sn)TiO<sub>4</sub> was prepared by spark plasma sintering (SPS) technique. Resulting samples, low-height cylinders, were subjected to microstructural observations, immersion measurements of density and porosity and X-ray diffraction phase analysis. Dielectric parameters – relative permittivity and loss factor – were tested in the frequency range from 80 Hz to 1 MHz and volume DC resistivity at 100 volts.</p><p>DOI: <a href="http://dx.doi.org/10.5755/j01.ms.22.3.8767">http://dx.doi.org/10.5755/j01.ms.22.3.8767</a></p> |
|---|---|
| ISSN: | 1392-1320 2029-7289 |