Measuring the 3-D wind vector with a weight-shift microlight aircraft

• Main Authors: S. Metzger, W. Junkermann, K. Butterbach-Bahl, H. P. Schmid, T. Foken
• Format: Article
• Language: English
• Published: Copernicus Publications 2011-07-01
• Series: Atmospheric Measurement Techniques
• Online Access: http://www.atmos-meas-tech.net/4/1421/2011/amt-4-1421-2011.pdf

This study investigates whether the 3-D wind vector can be measured reliably from a highly transportable and low-cost weight-shift microlight aircraft. Therefore we draw up a transferable procedure to accommodate flow distortion originating from the aircraft body and -wing. This procedure consists of the analysis of aircraft dynamics and seven successive calibration steps. For our aircraft the horizontal wind components receive their greatest single amendment (14 %, relative to the initial uncertainty) from the correction of flow distortion magnitude in the dynamic pressure computation. Conversely the vertical wind component is most of all improved (31 %) by subsequent steps considering the 3-D flow distortion distribution in the flow angle computations. Therein the influences of the aircraft's trim (53 %), as well as changes in the aircraft lift (16 %) are considered by using the measured lift coefficient as explanatory variable. Three independent lines of analysis are used to evaluate the quality of the wind measurement: (a) A wind tunnel study in combination with the propagation of sensor uncertainties defines the systems input uncertainty to ≈0.6 m s<sup>−1</sup> at the extremes of a 95 % confidence interval. (b) During severe vertical flight manoeuvres the deviation range of the vertical wind component does not exceed 0.3 m s<sup>−1</sup>. (c) The comparison with ground based wind measurements yields an overall operational uncertainty (root mean square error) of ≈0.4 m s<sup>−1</sup> for the horizontal and ≈0.3 m s<sup>−1</sup> for the vertical wind components. No conclusive dependence of the uncertainty on the wind magnitude (<8 m s<sup>−1</sup>) or true airspeed (ranging from 23–30 m s<sup>−1</sup>) is found. Hence our analysis provides the necessary basis to study the wind measurement precision and spectral quality, which is prerequisite for reliable Eddy-Covariance flux measurements.