Case study of technological problems arising from the use of new material, DOMEX steel sheet, on the components of the mower discs on the example of the production company SaMASZ Sp. Z o. o.
The paper describes the improvement of technological process of knife holder production used in disc mowers at SaMASZ Sp. With o.o. The improvement was aimed at eliminating cracks in the press of a 500t crank press press crush that occurred after the Boron 27 starting material was changed to Domex M...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2018-01-01
|
| Series: | MATEC Web of Conferences |
| Subjects: | |
| Online Access: | https://doi.org/10.1051/matecconf/201815702023 |
| Summary: | The paper describes the improvement of technological process of knife holder production used in disc mowers at SaMASZ Sp. With o.o. The improvement was aimed at eliminating cracks in the press of a 500t crank press press crush that occurred after the Boron 27 starting material was changed to Domex MC 500 high strength steel. The technology of regeneration of claws with identified operational cracks and a stand for fatigue tests was also proposed. Defectoscopy and strength testing methods have been developed to verify that the structure of the regenerated material is free from cracks or micro cracks in the material. |
|---|---|
| ISSN: | 2261-236X |