Utilization of Polypropylene in the Production of Metal-Filled Polymer Composites: Development and Characteristics

Utilization of Polypropylene in the Production of Metal-Filled Polymer Composites: Development and Characteristics

Metal-filled composites based on polypropylene waste have been successfully obtained with an injection molding method of metalized polymer raw materials. Using the model polymer, the peculiarities of the formation of the copper layer in solutions of chemical metallization on the polypropylene surfac...

Full description

Bibliographic Details
Main Authors:	Volodymyr Moravskyi, Anastasiia Kucherenko, Marta Kuznetsova, Ludmila Dulebova, Emil Spišák, Janka Majerníková
Format:	Article
Language:	English
Published:	MDPI AG 2020-06-01
Series:	Materials
Subjects:	polypropylene polymer waste metallization chemical recovery copper metal filled polymer composite
Online Access:	https://www.mdpi.com/1996-1944/13/12/2856

Similar Items

Studying the effect of concentration factors on the process of chemical metallization of powdered polyvinylchloride
by: Volodymyr Moravskyi, et al.
Published: (2018-05-01)

The mechanical behavior and deformation morphology of rubber-modified polypropylene.
by: Juska, Thomas David
Published: (1982)

Atomistic Modelling of Confined Polypropylene Chains between Ferric Oxide Substrates at Melt Temperature
by: Ali Gooneie, et al.
Published: (2016-10-01)

Mineral-filled polypropylene: Improvement of scratch resistance
by: Khatib, Jamal F.
Published: (2001)

Configuration of isotactic polypropylene
by: Alli, Sam
Published: (2009)

Antimicrobial Property of Polypropylene Composites and Functionalized Copper Nanoparticles
by: Noemi Jardón-Maximino, et al.
Published: (2021-05-01)

Antimicrobial Polymers with Metal Nanoparticles
by: Humberto Palza
Published: (2015-01-01)

Identifying the influence of the polymer matrix type on the structure formation of microcomposites when they are filled with copper particles
by: Roman Dinzhos, et al.
Published: (2020-10-01)

The Polypropylene Pope would be 70
by: T. Barany
Published: (2020-05-01)

Structural analysis of thick polypropylene moldings
by: Shindo, Nobuhiko
Published: (2006)

Maleic anhydride grafted polypropylene coatings on steel: Adhesion and wear.
by: Mahendrakar, Sridhar
Published: (2010)

Evaluation of the Effects of Nanofil® Nanoclays in the Blending of Polypropylene and Polystyrene
by: Opalko, Robert J.
Published: (2008)

Compatibilization of Polypropylene/Polyamide 6 Blend Fibers Using Photo-Oxidized Polypropylene
by: Francesco Paolo La Mantia, et al.
Published: (2018-12-01)

Calculating the composition of dispersion-filled polymer composite materials of various structures
by: Ch. N. Nguyen, et al.
Published: (2020-03-01)

Fiber Reinforced Polymer and Polypropylene Composite Retrofitting Technique for Masonry Structures
by: Saleem Muhammad Umair, et al.
Published: (2015-05-01)

Molecular weight effects on crystallization of polypropylene
by: Amer, Ismael
Published: (2011)

Characteristics of Polymer Materials with New Smart Utilities
by: Karolina Głogowska, et al.
Published: (2020-12-01)

Imaging and quantifying the different crystalline structures of polypropylene with the atomic force microscope
by: Klash, Abdalah
Published: (2008)

Interference of Biodegradable Plastics in the Polypropylene Recycling Process
by: María Dolores Samper, et al.
Published: (2018-10-01)

Impulse and DC breakdown strength of polypropylene thin film
by: Аина Николаевна Тумусова, et al.
Published: (2020-06-01)

Novel analytical approaches for studying degradation in polypropylene and propylene-1-pentene copolymers
by: De Goede, Stefan
Published: (2008)

Polypropylene/filler nanocomposites by melt compounding and in situ polymerization
by: Soltan, Omar
Published: (2010)

Polymer Composites Filled with Metal Derivatives: A Review of Flame Retardants
by: R. A. Ilyas, et al.
Published: (2021-05-01)

Development of Polypropylene-Based Single-Polymer Composites With Blends of Amorphous Poly-Alpha-Olefin and Random Polypropylene Copolymer
by: László József Varga, et al.
Published: (2020-06-01)

Microscopic analysis of the morphology of seams in friction stir welded polypropylene
by: Z. Kiss, et al.
Published: (2012-01-01)

Incorporation of poultry eggshell and litter ash as high loading polymer fillers in polypropylene
by: Thomas McGauran, et al.
Published: (2020-11-01)

Use of Dynamic Mechanical Testing, WAXD and SEM Image Analysis to Study the Properties of Polypropylene/Calcium Carbonate Nanocomposites
by: Marquina, Edgar Alberto
Published: (2010)

Synergistic effects of iron powder on intumescent flame retardant polypropylene system
Published: (2009-06-01)

Micromechanical Analysis of Strength of Polymer Networks with Polydisperse Structures
by: Tehrani, Mohammad Jafari
Published: (2017)

Examining the Effectiveness of Different Mixing Elements in the Twin Screw Compounding of Liquid Crystal Polymer and Polypropylene
by: Agrawal, Akash
Published: (2018)

Wood-filled polypropylene
by: Cole, Norris Vincent
Published: (2006)

Polymer/metal adhesion in hybrid cardiovascular stent
by: Mohan, Karthik
Published: (2010)

Copper Filled Poly(Acrylonitrile-co-Butadiene-co-Styrene) Composites for Laser-Assisted Selective Metallization
by: Piotr Rytlewski, et al.
Published: (2020-05-01)

Processing of Highly Filled Polymer–Metal Feedstocks for Fused Filament Fabrication and the Production of Metallic Implants
by: Christopher Gloeckle, et al.
Published: (2020-10-01)

Aluminum-Filled Amorphous-PET, a Composite Showing Simultaneous Increase in Modulus and Impact Resistance
by: Arfat Anis, et al.
Published: (2020-09-01)

Biaxially oriented polypropylene films using the Double Bubble Process
by: Benkreira, Hadj
Published: (2009)

Effect of various additives on the UV stability of polyethylene and polypropylene films
by: Eyenga, Imona Ilanga
Published: (2013)

Fabrication of a GMA-co-EDMA Monolith in a 2.0 mm i.d. Polypropylene Housing
by: Marcello Iacono, et al.
Published: (2016-03-01)

Morphology and properties of polypropylene/ethylene vinyl acetate copolymer/wood powder blend composites
Published: (2009-03-01)

Influence of Polypropylene Fiber on Tensile Property of a Cement-Polymer Based Thin Spray-On Liner
by: Qun Wei, et al.
Published: (2019-07-01)