Manufacturing of Aluminum Composite Material Using Stir Casting Process

• Main Authors: Muhammad Hayat Jokhio, Muhammad Ibrahim Panhwar, Mukhtiar Ali Unar
• Format: Article
• Language: English
• Published: Mehran University of Engineering and Technology 2011-01-01
• Series: Mehran University Research Journal of Engineering and Technology
• Online Access: http://publications.muet.edu.pk/research_papers/pdf/pdf62.pdf

Manufacturing of aluminum alloy based casting composite materials via stir casting is one of the prominent and economical route for development and processing of metal matrix composites materials. Properties of these materials depend upon many processing parameters and selection of matrix and reinforcements. Literature reveals that most of the researchers are using 2, 6 and 7xxx aluminum matrix reinforced with SiC particles for high strength properties whereas, insufficient information is available on reinforcement of \"Al2O3\" particles in 7xxx aluminum matrix. The 7xxx series aluminum matrix usually contains Cu-Zn-Mg. Therefore, the present research was conducted to investigate the effect of elemental metal such as Cu-Zn-Mg in aluminum matrix on mechanical properties of stir casting of aluminum composite materials reinforced with alpha \"Al2O3\" particles using simple foundry melting alloying and casting route. The age hardening treatments were also applied to study the aging response of the aluminum matrix on strength, ductility and hardness. The experimental results indicate that aluminum matrix cast composite can be manufactured via conventional foundry method giving very good responses to the strength and ductility up to 10% \"Al2O3\" particles reinforced in aluminum matrix.