Preparation of Sm0.2Ce0.8O1.9 electrolytes via the chitosan templating method and investigation of the sintering behavior

Preparation of Sm0.2Ce0.8O1.9 electrolytes via the chitosan templating method and investigation of the sintering behavior

Sm0.2Ce0.8O1.9 electrolytes were prepared using a novel chitosan templating method. To examine the sintering kinetics of the materials, 5 minutes, 1 hour, and 6 hours of sintering processes were carried out at 1200, 1300, and 1400 ⁰C. The phase structure of the sintered samples was clarified by XRD...

Full description

Bibliographic Details
Main Authors:	Dilara Güçtaş, Vedat Sarıboğa, M.A. Faruk Öksüzömer
Format:	Article
Language:	English
Published:	Taylor & Francis Group 2021-04-01
Series:	Journal of Asian Ceramic Societies
Subjects:	solid oxide fuel cell electrolyte sdc20 sintering grain growth
Online Access:	http://dx.doi.org/10.1080/21870764.2021.1891686

Similar Items

Effect of sintering temperature on the microstructure and ionic conductivity of Ce0.8Sm0.1Ba0.1O2-δ electrolyte
by: Mustafa Anwar, et al.
Published: (2017-03-01)

Preparation of gradient Ni-SDC anode by tape casting and co-sintering
by: Li X.B., et al.
Published: (2010-01-01)

Spark Plasma Sintering of Dielectric Ceramics Zr0.8Sn0.2TiO4
by: Pavel CTIBOR, et al.
Published: (2016-09-01)

Creating and Preserving Nanoparticles during Co-Sintering of Solid Oxide Electrodes and Its Impact on Electrocatalytic Activity
by: Sixbert P. Muhoza, et al.
Published: (2021-09-01)

Development by Mechanochemistry of La<sub>0.8</sub>Sr<sub>0.2</sub>Ga<sub>0.8</sub>Mg<sub>0.2</sub>O<sub>2.8</sub> Electrolyte for SOFCs
by: Francisco J. Garcia-Garcia, et al.
Published: (2020-03-01)

The sintering temperature effect on electrochemical properties of Ce0.8Sm0.05Ca0.15O2-δ (SCDC)-La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) heterostructure pellet
by: Xiyu Nie, et al.
Published: (2019-05-01)

A Bulk-Heterostructure Nanocomposite Electrolyte of Ce0.8Sm0.2O2-δ–SrTiO3 for Low-Temperature Solid Oxide Fuel Cells
by: Yixiao Cai, et al.
Published: (2021-01-01)

Investigation of the Feasibility of Manufacturing Solid Oxide Fuel Cell Graded Electrolytes by Suspension Plasma Spraying
by: Arevalo-Quintero, Olga Lucia
Published: (2010)

Investigation of the Feasibility of Manufacturing Solid Oxide Fuel Cell Graded Electrolytes by Suspension Plasma Spraying
by: Arevalo-Quintero, Olga Lucia
Published: (2010)

Enhancement of the Ionic Conductivity in Electric Field-Assisted Pressureless Sintered BITIVOX Solid Electrolytes
by: Midilane S. Medina, et al.
Published: (2019-08-01)

Dielectric, ferroelectric and magnetic properties of Bi0.78La0.08Sm0.14Fe0.85Ti0.15O3 ceramics prepared at different sintering conditions
by: Zhengxin Li, et al.
Published: (2018-12-01)

Parameter optimization for sintering of La0.6Sr0.4Co0.2Fe0.8O3-6 (LSCF6428) perovskite-structured ceramics by Taguchi method
by: Hashim Siti Salwa, et al.
Published: (2016-01-01)

Effect of sintering temperature on the dielectric, ferroelectric and energy storage properties of SnO2-doped Bi0.5(Na0.8K0.2)0.5TiO3 lead-free ceramics
by: Nguyen Truong-Tho, et al.
Published: (2020-08-01)

Design of a Reduction-Resistant Ce0.8Sm0.2 O 1.9 Electrolyte Through Growth of a Thin BaCe1−xSmxO3−α Layer over Electrolyte Surface
by: Sano, Mitsuru, et al.
Published: (2004)

Rapid laser reactive sintering of BaCe0.7Zr0.1Y0.1Yb0.1O3-δ electrolyte for protonic ceramic fuel cells
by: Shenglong Mu, et al.
Published: (2020-08-01)

Thermal Gradients with Sintered Solid State Electrolytes in Lithium-Ion Batteries
by: Robert Bock, et al.
Published: (2020-01-01)

THERMAL EXPANSION BEHAVIOR OF THE Ba0.2Sr0.8Co0.8Fe0.2O3−δ (BSCF) WITH Sm0.2Ce0.8O1.9
by: M. AHMADREZAEI, et al.
Published: (2014-03-01)

Co-Sintering Study of Na0.67[Ni0.1Fe0.1Mn0.8]O2 and NaSICON Electrolyte–Paving the way to High Energy Density All-Solid-State Batteries
by: Gerald Dück, et al.
Published: (2021-06-01)

Effect of Sintering Process on Ionic Conductivity of Li<sub>7-x</sub>La<sub>3</sub>Zr<sub>2-x</sub>Nb<sub>x</sub>O<sub>12</sub> (x = 0, 0.2, 0.4, 0.6) Solid Electrolytes
by: Lei Ni, et al.
Published: (2021-03-01)

Fracture Statistics Using Three-Parameter and Two-Parameter Weibull Distributions for Fe-0.4C-1.5Cr-1.5Ni-0.8Mn-0.2Mo Structural Sintered Steel
by: Fiał Ch., et al.
Published: (2016-09-01)

Electrochemical Performance of Ba0.5Sr0.5Co0.8Fe0.2O3−δ in Symmetric Cells With Sm0.2Ce0.8O1.9 Electrolyte for Nitric Oxide Reduction Reaction
by: Huangang Shi, et al.
Published: (2020-01-01)

Analise de eletrolitos de ZrO sub(2):Y sub(2) O sub(3) + B sub(2) O sub(3) e de eletrodos de La sub(0,8) Sr sub(0,2) Co sub (0,8) Fe sub (0,2) O sub (3-delta) por espectroscopia de impedancia
by: FLORIO, DANIEL Z. de
Published: (2003)

Analise de eletrolitos de ZrO sub(2):Y sub(2) O sub(3) + B sub(2) O sub(3) e de eletrodos de La sub(0,8) Sr sub(0,2) Co sub (0,8) Fe sub (0,2) O sub (3-delta) por espectroscopia de impedancia
by: FLORIO, DANIEL Z. de
Published: (2003)

Sintering effect on electrical properties and morphology of lead-free Na0.92k0.08NbO3 ceramics
by: Kathait Gambheer Singh, et al.
Published: (2019-01-01)

Fluctuation conductivity in two-band superconductor SmFeAsO0.8F0.2
by: Askerzade I.N., et al.
Published: (2015-09-01)

Influence of ZnO addition on microstructure and proton electrical conductivity of BaZr0.8Y0.2O3-δ ceramics
by: Wendler Leonardo P., et al.
Published: (2021-06-01)

Microstructure and Property of Sintered Fe-2Cu-0.8C-0.6Mo-2W Materials Prepared From Prediffused Powders
by: Wenchao Chen, et al.
Published: (2020-11-01)

Influence of hardening on the microstructure and the wear capacity of gears made of Fe1.5Cr0.2Mo sintered steel
by: Predki W., et al.
Published: (2010-01-01)

Synthesis of easily sinterable ceramic electrolytes based on Bi-doped 8YSZ for IT-SOFC applications
by: Luca Spiridigliozzi, et al.
Published: (2019-07-01)

The Effect of Barium Non-Stoichiometry on the Phase Structure, Sintering and Electrical Conductivity of BaZr0.7Pr0.1Y0.2O3
by: Mohamed Shibly, Kaamil
Published: (2015)

EFFECT OF THE SINTERING PROCESS ON THE MORPHOLOGY AND MECHANICAL PROPERTIES OF La0.6Sr0.4Co0.2Fe0.8O3-δ ASYMMETRIC FLAT MEMBRANES PREPARED BY THE PHASE INVERSION METHOD
by: Silvana Dwi Nurherdiana, et al.
Published: (2019-08-01)

Properties of Ce0.8Sm0.15R0.05O2–δ ( R = Sm, Ca, La), Ce0.8Sm0.15Ca0.025Sr0.025O1.875 and (La0.77Sr0.2Ba0.03)xCe1–xO2–δ ( x = 0.15, 0.2) electrolyte material by sol–gel
by: Wan-Yu Chen, et al.
Published: (2017)

SrCe0.9Sm0.1O3-α Compounded with NaCl-KCl as a Composite Electrolyte for Intermediate Temperature Fuel Cell
by: Ruijuan Shi, et al.
Published: (2018-09-01)

The study of sintering ability, microstructure, and conductivity of Ba0.8Sr0.2Ce0.8-xyZryInxY0.2O3- δ(x=0.05,0.1 y=0,0.1) Solid oxide fuel cell electrolyte material
by: Yu-jing Ren, et al.
Published: (2014)

Comparative Performance of Anode-Supported SOFCs Using a Thin Ce0.9Gd0.1O1.95 Electrolyte with an Incorporated BaCe0.8Y0.2O3 − α Layer in Hydrogen and Methane
by: Sano, Mitsuru, et al.
Published: (2006)

Effect of the sintering technique on the ferroelectric and d33 piezoelectric coefficients of Bi0.5(Na0.84K0.16)0.5TiO3 ceramic
by: G. Hernandez-Cuevas, et al.
Published: (2019-06-01)

Co-precipitation Synthesis of La0.6Sr0.4Co0.2Fe0.8O3-δ - Sm0.2Ce0.8 O3-δfor IT-SOFC Composite Cathode
by: Wei Xuan Zhong, et al.
Published: (2009)

The use of Weibull Statistics to Quantify Property Variability in Fe-3Mn-0.8C Sinter-Hardened Structurally Inhomogeneous Steels
by: Cias A., et al.
Published: (2013-12-01)

Characterization of La0.8Sr0.2Ga0.8Mg0.2O3-δ/carbonate composite electrolyte for low－temperature solid oxide fuel cells.
by: GAO,PEI-RU, et al.
Published: (2019)

Preparation and characterization of Ce0.8Sm0.2O1.9–La0.8Sr0.2Cr0.5Fe0.5O3-δ dual-phase membranes for oxygen permeation
by: Guangjun Zhang, et al.
Published: (2020-03-01)