PROPOSAL FOR BUILD A TEST STAND TO THE STUDY WATER RAM BASED ON THE RECOMMENDATIONS CONSTRUCTION
The main aim of this article was developed of a test stand to a study physics phenomena accruing at work in a ram water based on the construction recommendations. The experience gained by a number of attempts allowed to the developed construction recommendations that allowed to adjust the test stand...
Main Author: | Dariusz GRYGO |
---|---|
Format: | Article |
Language: | Polish |
Published: |
Rzeszow University of Technology
2016-05-01
|
Series: | Journal of Civil Engineering, Environment and Architecture |
Subjects: | |
Online Access: | http://doi.prz.edu.pl/pl/pdf/biis/592 |
Similar Items
-
Assessing the Rebound Hammer Test for Rammed Earth Material
by: Quoc-Bao Bui
Published: (2017-10-01) -
The Effect of Cement Addition on Water Vapour Resistance Factor of Rammed Earth
by: Piotr Narloch, et al.
Published: (2021-04-01) -
Ram pump hydraulic air test. Pressure conditions and flow measurements: Experimental research and case study
by: Arizcun Zúñiga, Paula María
Published: (2018) -
Acoustic impedance matching of a liquid-air termination within a pipe
by: Lunn, Robert Joseph, 1927-
Published: (1961) -
Growth performance of station tested rams in Slovenia
by: Drago Kompan, et al.
Published: (2010-01-01)