Low-noise structure optimization of a heavy commercial vehicle cab based on approximation model

• Main Authors: Zhiyong Zhang, Yibo Zhang, Caixia Huang, Xin Liu
• Format: Article
• Language: English
• Published: SAGE Publishing 2018-12-01
• Series: Journal of Low Frequency Noise, Vibration and Active Control
• Online Access: https://doi.org/10.1177/1461348418798403
• ISSN: 1461-3484; 2048-4046

Structure design for reducing noise is essential and widely studied because cab interior noise seriously affects the ride comfort of the driver and passengers, especially for heavy commercial vehicles. This paper proposes an enhancement investigation on the low-noise structure performance of a cab in a heavy commercial vehicle based on an approximation model. A series of vibroacoustic tests with varying running speeds are implemented first to acquire the vibration signals at four cab suspensions and the sound pressure signal at the right ear of the driver. The finite element model and structure–acoustic coupled model of the cab of a heavy commercial vehicle are established sequentially. When the vibration accelerations measured in the tests are converted into excitation signals using the cab structure–acoustic coupled model, the sound pressure of the right ear of the driver is predicted, and the accuracy of the cab structure–acoustic coupled model is then verified. After panel acoustic contribution analysis, an approximation model of critical panel thickness and the peak noise near the right ear of the driver is established in accordance with the radial basis function. Genetic algorithm is utilized to solve an optimization model to obtain optimal panel thicknesses. By comparing the right ear sound pressure before and after optimization, the results confirm that optimized panel thicknesses can reduce sound pressure level of the critical frequency.