Thermal Transmittance of Internal Partition and External Facade LSF Walls: A Parametric Study

• Main Authors: Paulo Santos, Gabriela Lemes, Diogo Mateus
• Format: Article
• Language: English
• Published: MDPI AG 2019-07-01
• Series: Energies
• Subjects: LSF construction; facade wall; partition wall; thermal transmittance; thermal bridges; parametric study; numerical simulations
• Online Access: https://www.mdpi.com/1996-1073/12/14/2671
• ISSN: 1996-1073

Light steel framed (LSF) construction is becoming widespread as a quick, clean and flexible construction system. However, these LSF elements need to be well designed and protected against undesired thermal bridges caused by the steel high thermal conductivity. To reduce energy consumption in buildings it is necessary to understand how heat transfer happens in all kinds of walls and their configurations, and to adequately reduce the heat loss through them by decreasing its thermal transmittance (<inline-formula> <math display="inline"> <semantics> <mi>U</mi> </semantics> </math> </inline-formula>-value). In this work, numerical simulations are performed to assess different setups for two kinds of LSF walls: an interior partition wall and an exterior facade wall. Several parameters were evaluated separately to measure their influence on the wall <inline-formula> <math display="inline"> <semantics> <mi>U</mi> </semantics> </math> </inline-formula>-value, and the addition of other elements was tested (e.g., thermal break strips) with the aim of achieving better thermal performances. The simulation modeling of a LSF interior partition with thermal break strips indicated a 24% <inline-formula> <math display="inline"> <semantics> <mi>U</mi> </semantics> </math> </inline-formula>-value reduction in comparison with the reference case of using the LSF alone (<inline-formula> <math display="inline"> <semantics> <mi>U</mi> </semantics> </math> </inline-formula> = 0.449 W/(m².K)). However, when the clearance between the steel studs was simulated with only 300 mm there was a 29% increase, due to the increase of steel material within the wall structure. For exterior facade walls (<inline-formula> <math display="inline"> <semantics> <mi>U</mi> </semantics> </math> </inline-formula> = 0.276 W/(m².K)), the model with 80 mm of expanded polystyrene (EPS) in the exterior thermal insulation composite system (ETICS) reduced the thermal transmittance by 19%. Moreover, when the EPS was removed the <inline-formula> <math display="inline"> <semantics> <mi>U</mi> </semantics> </math> </inline-formula>-value increased by 79%.