Sensing of the acoustic signal by waveguides
The work is focused on the possibilities of accoustic emission (AE) signal sensing from surfaces inaccessible for commonly used sensors. The aim of the work is to verify the possibility of assembly of several measuring devices for maximalization of the possibilities of AE signal sensing in practice....
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Mendel University Press
2008-01-01
|
Series: | Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis |
Subjects: | |
Online Access: | https://acta.mendelu.cz/56/1/0043/ |
id |
doaj-797ff93d045b4370a2286ee714929290 |
---|---|
record_format |
Article |
spelling |
doaj-797ff93d045b4370a2286ee7149292902020-11-24T21:53:40ZengMendel University PressActa Universitatis Agriculturae et Silviculturae Mendelianae Brunensis1211-85162464-83102008-01-01561435410.11118/actaun200856010043Sensing of the acoustic signal by waveguidesMichal Černý0Pavel Mazal1Josef Filípek2Ústav techniky a automobilové dopravy, Mendelova zemědělská a lesnická univerzita v Brně, Zemědělská 1, 613 00 Brno, Česká republikaÚstav konstruování, Vysoké učení technické v Brně, Technická 2, 616 69 Brno, Česká republikaÚstav techniky a automobilové dopravy, Mendelova zemědělská a lesnická univerzita v Brně, Zemědělská 1, 613 00 Brno, Česká republikaThe work is focused on the possibilities of accoustic emission (AE) signal sensing from surfaces inaccessible for commonly used sensors. The aim of the work is to verify the possibility of assembly of several measuring devices for maximalization of the possibilities of AE signal sensing in practice. For this purpose, samples of waveguides and sets of tools for their clamping with AE senzor have been constructed. These samples have been tested in laboratory conditions and functionality of the whole system has been validated in practise. Several sets of normalized AE signal measurements have been performed at all waveguides samples. The results have been evaluated from several points of view, concerning waveguide design. The results contributed to the knowledge of signal conduction through waveguide body, its changes and deformation. The results of evaluation has also confirmed that waveguide shape differences do not cause any critical failings. The possibility of further device set development have been confirmed.https://acta.mendelu.cz/56/1/0043/acoustic emissionwaveguidenon-destructive test |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Michal Černý Pavel Mazal Josef Filípek |
spellingShingle |
Michal Černý Pavel Mazal Josef Filípek Sensing of the acoustic signal by waveguides Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis acoustic emission waveguide non-destructive test |
author_facet |
Michal Černý Pavel Mazal Josef Filípek |
author_sort |
Michal Černý |
title |
Sensing of the acoustic signal by waveguides |
title_short |
Sensing of the acoustic signal by waveguides |
title_full |
Sensing of the acoustic signal by waveguides |
title_fullStr |
Sensing of the acoustic signal by waveguides |
title_full_unstemmed |
Sensing of the acoustic signal by waveguides |
title_sort |
sensing of the acoustic signal by waveguides |
publisher |
Mendel University Press |
series |
Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis |
issn |
1211-8516 2464-8310 |
publishDate |
2008-01-01 |
description |
The work is focused on the possibilities of accoustic emission (AE) signal sensing from surfaces inaccessible for commonly used sensors. The aim of the work is to verify the possibility of assembly of several measuring devices for maximalization of the possibilities of AE signal sensing in practice. For this purpose, samples of waveguides and sets of tools for their clamping with AE senzor have been constructed. These samples have been tested in laboratory conditions and functionality of the whole system has been validated in practise. Several sets of normalized AE signal measurements have been performed at all waveguides samples. The results have been evaluated from several points of view, concerning waveguide design. The results contributed to the knowledge of signal conduction through waveguide body, its changes and deformation. The results of evaluation has also confirmed that waveguide shape differences do not cause any critical failings. The possibility of further device set development have been confirmed. |
topic |
acoustic emission waveguide non-destructive test |
url |
https://acta.mendelu.cz/56/1/0043/ |
work_keys_str_mv |
AT michalcerny sensingoftheacousticsignalbywaveguides AT pavelmazal sensingoftheacousticsignalbywaveguides AT joseffilipek sensingoftheacousticsignalbywaveguides |
_version_ |
1725870768464592896 |