| Summary: | In the sewage treatment plants, phosphorus compounds presented constantly, due to the sources of their appearance. In urban wastewater, phosphorus stays in various compounds – dissolved, insoluble, organic, mineral, simple and complex forms. Only phosphates and total phosphorus are monitored in wastewater chemicals laboratories. The data on phosphorus compounds containing in the wastewater of a number of cities is analyzed in the study. The impact of the biological wastewater treatment process on the efficiency of phosphorus removal was assessed. The research was carried out on an experimental technological installation. It is shown that in the original wastewater not only the concentration of total phosphorus and phosphates is constantly varying, but also their ratio. In the process of biological treatment, a number of complex biochemical and physical-chemical processes are parallel: assimilation, hydrolysis, and adsorption. The effectiveness of these processes is influenced by the magnitude of the initial concentration of total phosphorus and the amount of active dose of sludge. It has been recognized that the increased efficiency of the removal of total phosphorus has an effect on both the increase in the active dose of sludge and the size of the initial concentration of total phosphorus. However, the residual concentration of total phosphorus is affected by its original content, while the initial content of the total phosphorus is affected insignificantly.
|
|---|
