WIND TUNNEL RESEARCH ON THE INFLUENCE OF ACTIVE AIRFLOW ON THE LIFT FORCE GENERATED BY THE AIRFOIL

• Main Author: Paweł Magryta
• Format: Article
• Language: English
• Published: Society of Polish Mechanical Engineers and Technicians 2013-09-01
• Series: Advances in Science and Technology Research Journal
• Subjects: wind tunnel; airfoil; 3D printer
• Online Access: http://www.journalssystem.com/astrj/Wind-tunnel-research-on-the-influence-of-active-airflow-on-the-lift-force-generated-by-the-airfoil,186,0,2.html

The paper discusses the results of wind tunnel tests of airfoils with additional active airflow applied to their upper surfaces. These studies were carried out for a range of velocities up to 28 m/s in an open wind tunnel. Several types of airfoils selected for the examination feature different geometries and are widely applied in today’s aviation industry. The changes in the lift and drag force generated by these airfoils were recorded during the study. The test bench for the tests was equipped with a compressor and a vacuum pump to enable airflow through some holes on the airfoil upper surface. A rapid prototyping method and a 3D printer based on a powder printing technique were applied to print the airfoils. All of their surfaces were subject to surface grinding to smooth their external surfaces. The wind tunnel tests with and without active airflow applied to airfoils are summarised in the paper.