Low temperature spark plasma sintering of TC4/HA composites

Low temperature spark plasma sintering of TC4/HA composites

Ti6Al4V/hydroxyapatite composites (TC4/HA) have been prepared by high energy ball milling and low temperature spark plasma sintering at 600 °C, 550 °C, 500 °C and 450 °C, respectively. The sintering temperature of the composites was sharply decreased as the result of the activation and surficial mod...

Full description

Bibliographic Details
Main Authors:	Huiliang Shao, Lei Cao, Daqian Sun, Zhankui Zhao
Format:	Article
Language:	English
Published:	Elsevier 2016-04-01
Series:	Progress in Natural Science: Materials International
Subjects:	High energy ball milling Composite Mechanical properties
Online Access:	http://www.sciencedirect.com/science/article/pii/S1002007116300144

Similar Items

Fabrication of the Zirconium Diboride-Reinforced Composites by a Combination of Planetary Ball Milling, Turbula Mixing and Spark Plasma Sintering
by: Iwona Sulima, et al.
Published: (2021-07-01)

Effects of Powder Preparation and Sintering Temperature on Properties of Spark Plasma Sintered Ti-48Al-2Cr-8Nb Alloy
by: Zhenhua Wang, et al.
Published: (2019-08-01)

Compressive strength and thermal properties of spark plasma sintered Al-Al2O3 nanocomposite
by: Saheb Nouari, et al.
Published: (2018-01-01)

Reactive Spark Plasma Sintering and Mechanical Properties of Zirconium Diboride–Titanium Diboride Ultrahigh Temperature Ceramic Solid Solutions
by: Karthiselva N. S., et al.
Published: (2016-09-01)

Colossal relative permittivity and low dielectric loss in BaFe0.5Nb0.5O3 ceramics prepared by spark plasma sintering
by: H. Mahfoz Kotb, et al.
Published: (2020-12-01)

Structural Investigations of TiC–Cu Nanocomposites Prepared by Ball Milling and Spark Plasma Sintering
by: Nguyen Thi Hoang ,Oanh, et al.
Published: (2017-04-01)

Structure and Deformation Behavior of Ti-SiC Composites Made by Mechanical Alloying and Spark Plasma Sintering
by: Dariusz Garbiec, et al.
Published: (2019-04-01)

The Structure and Mechanical Properties of High-Strength Bulk Ultrafine-Grained Cobalt Prepared Using High-Energy Ball Milling in Combination with Spark Plasma Sintering
by: Ivo Marek, et al.
Published: (2016-05-01)

Microstructure and Mechanical Behavior of Al-Mg Composites Synthesized by Reactive Sintering
by: Rub Nawaz Shahid, et al.
Published: (2018-09-01)

Spark plasma sintering of a high-energy ball milled Mg-10 wt% Al alloy
by: M.U.F. Khan, et al.
Published: (2020-06-01)

Investigation of Formation Behaviour of Al–Cu Intermetallic Compounds in Al–50vol%Cu Composites Prepared by Spark Plasma Sintering under High Pressure
by: Dasom Kim, et al.
Published: (2021-01-01)

Preparation and microstructure of machinable Al2O3/mica composite by ball milling and hot-press sintering
by: Tian Qingbo, et al.
Published: (2016-09-01)

Refractory High-Entropy HfTaTiNbZr-Based Alloys by Combined Use of Ball Milling and Spark Plasma Sintering: Effect of Milling Intensity
by: Natalia Shkodich, et al.
Published: (2020-09-01)

Effect of milling time on microstructure and mechanical properties of TiC-CoCrFeNi composites prepared by hot pressing sintering
by: WANG Gui-fang, et al.
Published: (2019-06-01)

Effect of Ball-milling Process on the Microstructure and Mechanical Properties of <i>In-situ</i> Synthesized Carbon Nanotube Reinforced Aluminum Composites
by: YANG Xu-dong, et al.
Published: (2017-09-01)

Structure and Phase Composition of a W-Ta-Mo-Nb-V-Cr-Zr-Ti Alloy Obtained by Ball Milling and Spark Plasma Sintering
by: Ivan A. Ditenberg, et al.
Published: (2020-01-01)

Evaluation of microstructural and nanomechanical performance of spark plasma sintered TiFe-SiC reinforced aluminium matrix composites
by: Samuel Olukayode Akinwamide, et al.
Published: (2020-11-01)

Mechanical Properties of Composites with Titanium Diboride Fabricated by Spark Plasma Sintering
by: Sulima I., et al.
Published: (2017-09-01)

Effect of Short Attritor-Milling of Magnesium Alloy Powder Prior to Spark Plasma Sintering
by: Peter Minárik, et al.
Published: (2020-09-01)

Investigation of Thermophysical Properties of Zr-Based Metallic Glass-Polymer Composite
by: Adit Sharma, et al.
Published: (2021-09-01)

High-Energy Ball Milling and Spark Plasma Sintering of the CoCrFeNiAl High-Entropy Alloy
by: Alexander S. Rogachev, et al.
Published: (2020-11-01)

Fabrication and Mechanical Properties of Aluminum Matrix Composites Reinforced with Carbon Nanotubes and Alumina
by: YANG Xu-dong, et al.
Published: (2016-07-01)

Development of SiC/PVB Composite Powders for Selective Laser Sintering Additive Manufacturing of SiC
by: Peng Zhou, et al.
Published: (2018-10-01)

CNTs Modified and Enhanced Cu Matrix Composites
by: ZHANG Wen-zhong, et al.
Published: (2016-12-01)

Balanced Mechanical and Tribological Performance of High-Frequency-Sintered Al-SiC Achieved via Innovative Milling Route—Experimental and Theoretical Study
by: Ahmed Fouly, et al.
Published: (2021-06-01)

THE EFFECT OF THE MgO AGGREGATE SIZE ON THE DENSIFICATION OF SINTERED MgO
by: Endong Jin, et al.
Published: (2020-02-01)

In Vitro Corrosion Properties of Mg Matrix In Situ Composites Fabricated by Spark Plasma Sintering
by: Nguyen Q. Cao, et al.
Published: (2017-09-01)

Sifat Mekanik Produk Metalurgi Serbuk dari Proses Ball Milling dengan Bahan Baku Al7075 Terhadap Variasi Temperatur Sinter dan Tekanan Kompaksi
by: Hizkia Alpha Dewanto, et al.
Published: (2021-07-01)

Spark plasma sintering treatment of cold sprayed materials for synthesis and structural modification: A case study using TiC-Cu composites
by: Bokhonov, B.B, et al.
Published: (2022)

Preparation and characterization of hydroxyapatite reinforced with hardystonite as a novel bio-nanocomposite for tissue engineering
by: Hassan Gheisari, et al.
Published: (2015-04-01)

Synthesis and Characterization of Copper-Based Composites Reinforced by CuZrAlNiTi Amorphous Particles with Enhanced Mechanical Properties
by: Kinga Tomolya, et al.
Published: (2017-03-01)

Regulating Mechanical Properties of Al/SiC by Utilizing Different Ball Milling Speeds
by: Saud M. Almotairy, et al.
Published: (2020-04-01)

Effect of ball-milling on the physicochemical properties of maize starch
by: Shenghua He, et al.
Published: (2014-09-01)

Formation of Nanoscale Metallic Glassy Particle Reinforced Al-Based Composite Powders by High-Energy Milling
by: Weiwen Zhang, et al.
Published: (2017-10-01)

Mechanical Properties and Corrosion Resistance of Magnesium–Hydroxyapatite Composites Fabricated by Spark Plasma Sintering
by: Ikuho Nakahata, et al.
Published: (2020-09-01)

Processing of Syndiotactic Polystyrene to Microspheres for Part Manufacturing through Selective Laser Sintering
by: Nicolas Mys, et al.
Published: (2016-10-01)

Processing of Polysulfone to Free Flowing Powder by Mechanical Milling and Spray Drying Techniques for Use in Selective Laser Sintering
by: Nicolas Mys, et al.
Published: (2016-04-01)

CNTs/Al5083 Composites of High-performance Uniform and Dispersion Fabricated by High-energy Ball-milling
by: GUO Li, et al.
Published: (2017-11-01)

B4C-Al Composites Fabricated by the Powder Metallurgy Process
by: Ling Zhang, et al.
Published: (2017-09-01)

The Effect of Fullerene Soot Nanoparticles on the Microstructure and Properties of Copper-Based Composites
by: Elizaveta V. Bobrynina, et al.
Published: (2020-09-01)