TERMS OF DEPHOSPHORIZATION OF LIQUID METAL IN DRAFT LADLE

TERMS OF DEPHOSPHORIZATION OF LIQUID METAL IN DRAFT LADLE

The received results show that dephosphorization of alloyed cast irons provides improvement of mechanical properties, decrease of cold-shortness of moulded pieces at low consumption of dephosphorator.

Bibliographic Details
Main Authors:	A. G. Georgadze, V. I. Gerner, M. I. Elashvili, P. A. Nikiforov, A. N. Pletnev, S. A. Smirnov
Format:	Article
Language:	English
Published:	Belarusian National Technical University 2012-09-01
Series:	Litʹë i Metallurgiâ
Online Access:	https://lim.bntu.by/jour/article/view/334

Similar Items

IMPROVEMENT OF QUALITY OF THE BRIQUETTED FERROSILICIUM
by: A. G. Georgadze, et al.
Published: (2013-02-01)

SOME ECONOMIC INCENTIVES AT USING OF THE WORKED OVER WASTE PRODUCTS IN METALLURGICAL PRODUCTION
by: S. A. Nikiforov, et al.
Published: (2013-02-01)

THE FOUNDRY INOCULANT CONTAINING ALKALI-EARTH METAL FOR LADLE REFINING
by: I. V. Provorova, et al.
Published: (2016-08-01)

The kinetics of liquid iron dephosphorization using lime based slags
by: Monaghan, Brian Joseph
Published: (1996)

Mechanism of Phosphorus Enrichment in Dephosphorization Slag Produced Using the Technology of Integrating Dephosphorization and Decarburization
by: Haimeng Xue, et al.
Published: (2021-01-01)

ANALYSIS OF BOTTOM MIXING ON THE PROCESSES OF LIME DISSOLVING, DEPHOSPHORIZATION AND DESULFURIZATION OF METAL IN ARC STEEL-MAKING FURNACE
by: V. F. Sobolev, et al.
Published: (2006-02-01)

Dephosphorization of hot metal using rare earth oxide-containing slags
by: Ye Maolin, et al.
Published: (2020-11-01)

Gravitational segregation of liquid slag in large ladle
by: J. Chen, et al.
Published: (2012-04-01)

PERICLASE PLATES FOR SLIDING SHUTTERS OF CASTING LADLES
by: I. A. Bondarenko, et al.
Published: (2005-11-01)

Slag, Steel, Ladle and Non-metallic Inclusions Equilibria in an ASEA-SKF Ladle Furnace
by: Riyahimalayeri, Kamrooz
Published: (2012)

A Study on the Correlation between Ladle Glaze and Non-Metallic Inclusions in the Ladle Treatment
by: Song, Minho
Published: (2011)

LADLE FOR MODIFICATION AND POURING OF CAST IRON
by: L. Z. Pisarenko, et al.
Published: (2006-02-01)

Thermodynamic and Kinetic Simulations of Dephosphorization slags
by: Li Dong Kai, et al.

Parameters affecting dephosphorization of stainless steel
by: Wendel, Erik, et al.
Published: (2015)

New trends in basic oxygen furnace dephosphorization
by: Keskinkilic E.
Published: (2020-01-01)

The investigation on the middle period dephosphorization in 70t converter
by: Nanyang Deng, et al.
Published: (2020-11-01)

Dephosphorization by Double-Slag Process in Converter Steelmaking
by: Wang Yang, et al.
Published: (2018-07-01)

Study of the slag-metal interaction in ladle treatment
by: Dayal, Pranesh
Published: (2005)

Research of Non-metallic Inclusions Removal in Teeming Ladles of Various Design
by: Molchanov L. S., et al.
Published: (2018-11-01)

Monitoring and Prediction of the Liquid Steel Temperature in the Ladle and Tundish
by: Dorčák, Ľ., et al.
Published: (2006-01-01)

Effects of calcium ferrite slag on dephosphorization of hot metal during pretreatment in the BOF converter
by: Wei Wu, et al.
Published: (2020-05-01)

Calculations of Viscosity and Solid Phase Fraction in Dephosphorization Slags
by: Yu-En. Chang, et al.
Published: (2017)

A study of high-strength bolts after dephosphoring
by: Shao-Yi Hsia, et al.
Published: (2016-03-01)

Dephosphorization mechanism and phase change in the reduction of converter slag
by: Xue Yuekai, et al.
Published: (2021-07-01)

Dynamics analysis of advanced recycling method for the steelmaking dephosphorization
by: Chou-Cheng Wu, et al.
Published: (2015)

The role of slag chemistry in dephosphorization : an equilibrium and kinetic study
by: Creehan, R. D.
Published: (1984)

APPLICATION OF HEAT-RESISTING LIDS FOR STEEL TEEMING LADLES AT RUP “BMZ”
by: M. A. Murikov, et al.
Published: (2008-09-01)

Utilization of casting ladle lining enthalpy for heating gas savings in the course of ladle preheating
by: D. Jančar, et al.
Published: (2014-04-01)

Study on Slag Forming Route of Dephosphorization in Combined Blown Converter
by: Bin Zhu, et al.
Published: (2021-07-01)

Non-Contact Measurement of Molten Metal in Torpedo Ladles Using Microwaves
by: K G Crudgington, et al.
Published: (1990-12-01)

MATHEMATICAL SIMULATION OF ARGON MIXING PROCESSES AND STEEL SATURATION WITH CARBON IN LADLE
by: A. N. Chichko, et al.
Published: (2006-06-01)

Etudes expérimentale et thermodynamique de la déphosphoration du silicium liquide pour des applications photovoltaïques
by: Favre, Simon
Published: (2017)

Non-metallic inclusions controling at the ladle furnace (LF) station
by: M. Warzecha
Published: (2020-01-01)

DEVELOPMENT OF SOFTWARE “PRODSP-1.0” FOR OPTIMIZATION OF THE DEPHOSPHORIZATION PROCESSES IN ARC STEEL-FURNACES FOR TECHNOLOGICAL LINE-UP OF RUP “BMZ”
by: A. A. Chichko, et al.
Published: (2006-11-01)

Aspects on slag/metal equilibrium calculations and metal droplet characteristics in ladle slags
by: Ekengård, Johan
Published: (2004)

ON OPTIMIZATION OF STEELMAKING IN ELECTRIC ARC FURNACE AND ITS LADLE TREATMENT IN LADLE-FURNACE
by: Alexander Yuryevich Kem, et al.
Published: (2014-06-01)

Study on stirring behavior of liquid steel in bottom-blowing ladle with immersed cylinder
by: M. G. Shen, et al.
Published: (2016-10-01)

Investigation into the dephosphorization of ferromanganese alloys for production of advanced high strength steels
by: Maphutha, Mamaotseng Patricia
Published: (2021)

A Review of Multi-phase Slag Refining for Dephosphorization in the Steelmaking Process
by: Wenhui Lin, et al.
Published: (2020-11-01)

Phosphorus(p) migration behavior in the process of converter slag gasification dephosphorization
by: S. H. Wang, et al.
Published: (2022-01-01)