Pinhole Formation in Printed Electronic Traces Fabricated via Molten Metal Droplet Jetting

• Main Authors: Manoj Meda, Viktor Sukhotskiy, Denis Cormier
• Format: Article
• Language: English
• Published: MDPI AG 2021-06-01
• Series: Electronics
• Subjects: printed electronics; droplet jetting; pinhole
• Online Access: https://www.mdpi.com/2079-9292/10/13/1568

The fabrication of printed electronic devices via molten metal droplet jetting has enormous potential in flexible electronic device applications due to the extremely high electrical conductivity and excellent substrate adhesion of printed features. However, large pinholes (which could be detrimental to the feature performance) have been experimentally observed when molten metal droplets of aluminum 4043 alloy are deposited and solidified on a polyimide (PI) substrate. In this study, we have shown that subjecting the polymer substrate to elevated temperature during droplet deposition considerably reduces the number and size of pinholes. The formation mechanism behind the large pinholes is interpreted as the release of the adsorbed/absorbed moisture from the polymer substrate into the solidifying droplet due to the rapid rise in temperature of the substrate upon droplet impact. Through numerical modelling, we have shown that the temperature of the polyimide substrate underneath the deposited droplet exceeds the boiling point of water while the metal droplet is still in liquid state, showing the possibility of water vapor escaping from the substrate and causing pinholes in the solidifying metal.