Few-Mode Fibers With Uniform Differential Mode Group Delay for Microwave Photonic Signal Processing

We present a novel design of few-mode fiber (FMF) with a uniform differential mode group delay (U-DMGD) among propagating modes and apply the FMF to a single-fiber delay line module for implementing microwave photonic finite impulse response (FIR) filters. By optimizing key parameters such as the co...

Full description

Bibliographic Details
Main Authors: Jian Zhao, Huan Zhang, Zhiqun Yang, Jinsheng Xu, Tianhua Xu, Chao Wang
Format: Article
Language:English
Published: IEEE 2020-01-01
Series:IEEE Access
Subjects:
Online Access:https://ieeexplore.ieee.org/document/9133386/
Description
Summary:We present a novel design of few-mode fiber (FMF) with a uniform differential mode group delay (U-DMGD) among propagating modes and apply the FMF to a single-fiber delay line module for implementing microwave photonic finite impulse response (FIR) filters. By optimizing key parameters such as the core grading exponent and the dimension of the trench of FMF, a U-DMGD between adjacent modes among four modes (LP<sub>01</sub>, LP<sub>11</sub>, LP<sub>02</sub> and LP<sub>31</sub>) over the entire C band is achieved. Wavelength dependence is entirely removed. An FIR microwave photonic filter (MPF) implemented using the designed 1-km FMF is investigated through numerical simulations. The free spectral range (FSR) of the MPF is 5.7 GHz, the 3-dB bandwidth is 1.26 GHz, and the main lobe-to-side lobe ratio (MSR) is 10.42 dB. Discussions on fabrication aspects have also been presented. The proposed single-fiber delay line structure based on FMF can significantly reduce the system complexity of microwave photonic signal processing.
ISSN:2169-3536