Multi-Block High-Order DNS Code Development for Jet in Turbulent Cross-Flow Simulation

• Main Authors: J. Castagna, Y. F. Yao
• Format: Article
• Language: English
• Published: SAGE Publishing 2012-12-01
• Series: Journal of Algorithms & Computational Technology
• Online Access: https://doi.org/10.1260/1748-3018.6.4.593

A multi-block high-order finite-difference direct numerical simulation (DNS) code has been developed for studying turbulent flows over complex geometries. A global mapping technique is adopted and applied to a multiblock domain arrangement, in which each block is consisted of a structured mesh and the adjacent blocks are overlapped and matched with each other along the common interfaces. The physical bounds of interfaces are determined through a pre-processing, and a pre-compiler is developed to reduce the computational cost of expensive Jacobian calculations. The multiblock DNS code has been validated for benchmark test cases, including a free-stream preservation on three-dimensional wavy grids and a pulse signal traveling through an interface with different grid density. The parallel efficiency has been evaluated on various HPC platforms with very good scalability achieved up to 1000+ processors. Further code application has been carried out for a square jet flow interacting with a fully developed turbulent cross-flow. The conditions are the Reynolds number Re ∞ = 1000, based on the free-stream quantities and the jet exit width, and a jet to a cross-flow velocity ratio of R = 0.5, 1.5, respectively. A counter-rotating vortex pair has been captured downstream of the jet exit and it was also found that the streamwise and the spanwise mean velocity profiles are in reasonable good agreements with available experimental measurements at Re ∞ = 4700. However, some discrepancies are observed in other flow statistics such as the normal mean velocity and the kinetic energy distributions, and they are probably due to the low Reynolds number effect of the simulation.