Modeling and research of the process of preparing the surface of a part for thermal spray coating
The article presents an analysis of ways to increase the adhesive strength of antifriction coating. A rational method for the mechanical formation of surfaces is proposed. The calculation of the workpiece based on the finite element method has been carried out. The theoretical dependences of metal l...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2020-01-01
|
| Series: | MATEC Web of Conferences |
| Online Access: | https://www.matec-conferences.org/articles/matecconf/pdf/2020/25/matecconf_icmtmte2020_03052.pdf |
| Summary: | The article presents an analysis of ways to increase the adhesive strength of antifriction coating. A rational method for the mechanical formation of surfaces is proposed. The calculation of the workpiece based on the finite element method has been carried out. The theoretical dependences of metal lifting on the depth of the rolling roller are obtained. The results of a field experiment are presented. A comparative analysis of theoretical and practical results of the research has been carried out. Recommendations are given for the further use of the net rolling method with a pre-cut “ragged thread”. |
|---|---|
| ISSN: | 2261-236X |