Waviness of Freeform Surface Characterizations from Austenitic Stainless Steel (316L) Manufactured by 3D Printing-Selective Laser Melting (SLM) Technology
The paper presents the results of tests of surface waviness of samples made in the powder bed fusion technology. The models were built using 316L steel-based powder with high corrosion resistance. The samples were placed on the construction platform at three different angles (0°, 45°, 90°) in XZ pla...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2020-09-01
|
| Series: | Materials |
| Subjects: | |
| Online Access: | https://www.mdpi.com/1996-1944/13/19/4372 |
| id |
doaj-72a7e70f7fa540e0889af316602cad17 |
|---|---|
| record_format |
Article |
| spelling |
doaj-72a7e70f7fa540e0889af316602cad172020-11-25T03:20:04ZengMDPI AGMaterials1996-19442020-09-01134372437210.3390/ma13194372Waviness of Freeform Surface Characterizations from Austenitic Stainless Steel (316L) Manufactured by 3D Printing-Selective Laser Melting (SLM) TechnologyTomasz Kozior0Jerzy Bochnia1Paweł Zmarzły2Damian Gogolewski3Thomas G. Mathia4Department of Mechanical Engineering and Metrology, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, PolandDepartment of Mechanical Engineering and Metrology, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, PolandDepartment of Mechanical Engineering and Metrology, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, PolandDepartment of Mechanical Engineering and Metrology, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, PolandLaboratoire de Tribologie et Dynamique des Systemes (LTDS) -CNRS Ecole Centrale de Lyon, 69134 Lyon, FranceThe paper presents the results of tests of surface waviness of samples made in the powder bed fusion technology. The models were built using 316L steel-based powder with high corrosion resistance. The samples were placed on the construction platform at three different angles (0°, 45°, 90°) in XZ plane. Then, using an optical profilometer, the parameters of the geometric structure of the surface of the primary profile and the separated waviness component were measured. Analyzing the results of the test, it can be stated that the orientation of model arrangement has an impact on the quality of the technological surface texture, what has significance impact on wear processes and mechanical properties.https://www.mdpi.com/1996-1944/13/19/4372freeform surface3D printingwavinessrapid prototypingsurface topographySLM technology |
| collection |
DOAJ |
| language |
English |
| format |
Article |
| sources |
DOAJ |
| author |
Tomasz Kozior Jerzy Bochnia Paweł Zmarzły Damian Gogolewski Thomas G. Mathia |
| spellingShingle |
Tomasz Kozior Jerzy Bochnia Paweł Zmarzły Damian Gogolewski Thomas G. Mathia Waviness of Freeform Surface Characterizations from Austenitic Stainless Steel (316L) Manufactured by 3D Printing-Selective Laser Melting (SLM) Technology Materials freeform surface 3D printing waviness rapid prototyping surface topography SLM technology |
| author_facet |
Tomasz Kozior Jerzy Bochnia Paweł Zmarzły Damian Gogolewski Thomas G. Mathia |
| author_sort |
Tomasz Kozior |
| title |
Waviness of Freeform Surface Characterizations from Austenitic Stainless Steel (316L) Manufactured by 3D Printing-Selective Laser Melting (SLM) Technology |
| title_short |
Waviness of Freeform Surface Characterizations from Austenitic Stainless Steel (316L) Manufactured by 3D Printing-Selective Laser Melting (SLM) Technology |
| title_full |
Waviness of Freeform Surface Characterizations from Austenitic Stainless Steel (316L) Manufactured by 3D Printing-Selective Laser Melting (SLM) Technology |
| title_fullStr |
Waviness of Freeform Surface Characterizations from Austenitic Stainless Steel (316L) Manufactured by 3D Printing-Selective Laser Melting (SLM) Technology |
| title_full_unstemmed |
Waviness of Freeform Surface Characterizations from Austenitic Stainless Steel (316L) Manufactured by 3D Printing-Selective Laser Melting (SLM) Technology |
| title_sort |
waviness of freeform surface characterizations from austenitic stainless steel (316l) manufactured by 3d printing-selective laser melting (slm) technology |
| publisher |
MDPI AG |
| series |
Materials |
| issn |
1996-1944 |
| publishDate |
2020-09-01 |
| description |
The paper presents the results of tests of surface waviness of samples made in the powder bed fusion technology. The models were built using 316L steel-based powder with high corrosion resistance. The samples were placed on the construction platform at three different angles (0°, 45°, 90°) in XZ plane. Then, using an optical profilometer, the parameters of the geometric structure of the surface of the primary profile and the separated waviness component were measured. Analyzing the results of the test, it can be stated that the orientation of model arrangement has an impact on the quality of the technological surface texture, what has significance impact on wear processes and mechanical properties. |
| topic |
freeform surface 3D printing waviness rapid prototyping surface topography SLM technology |
| url |
https://www.mdpi.com/1996-1944/13/19/4372 |
| work_keys_str_mv |
AT tomaszkozior wavinessoffreeformsurfacecharacterizationsfromausteniticstainlesssteel316lmanufacturedby3dprintingselectivelasermeltingslmtechnology AT jerzybochnia wavinessoffreeformsurfacecharacterizationsfromausteniticstainlesssteel316lmanufacturedby3dprintingselectivelasermeltingslmtechnology AT pawełzmarzły wavinessoffreeformsurfacecharacterizationsfromausteniticstainlesssteel316lmanufacturedby3dprintingselectivelasermeltingslmtechnology AT damiangogolewski wavinessoffreeformsurfacecharacterizationsfromausteniticstainlesssteel316lmanufacturedby3dprintingselectivelasermeltingslmtechnology AT thomasgmathia wavinessoffreeformsurfacecharacterizationsfromausteniticstainlesssteel316lmanufacturedby3dprintingselectivelasermeltingslmtechnology |
| _version_ |
1724619428654481408 |