Sidewall Slope Control of InP Via Holes for 3D Integration
This is the first demonstration of sidewall slope control of InP via holes with an etch depth of more than 10 μm for 3D integration. The process for the InP via holes utilizes a common SiO<sub>2</sub> layer as an InP etch mask and conventional inductively coupled plasma (ICP) etcher oper...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2021-01-01
|
| Series: | Micromachines |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2072-666X/12/1/89 |
| Summary: | This is the first demonstration of sidewall slope control of InP via holes with an etch depth of more than 10 μm for 3D integration. The process for the InP via holes utilizes a common SiO<sub>2</sub> layer as an InP etch mask and conventional inductively coupled plasma (ICP) etcher operated at room temperature and simple gas mixtures of Cl<sub>2</sub>/Ar for InP dry etch. Sidewall slope of InP via holes is controlled within the range of 80 to 90 degrees by changing the ICP power in the ICP etcher and adopting a dry-etched SiO<sub>2</sub> layer with a sidewall slope of 70 degrees. Furthermore, the sidewall slope control of the InP via holes in a wide range of 36 to 69 degrees is possible by changing the RF power in the etcher and introducing a wet-etched SiO<sub>2</sub> layer with a small sidewall slope of 2 degrees; this wide slope control is due to the change of InP-to-SiO<sub>2</sub> selectivity with RF power. |
|---|---|
| ISSN: | 2072-666X |