Defect reduction for fabric cutting process to produce polo shirts : a case study of garment factory

• Main Authors: Panicha Suttanako, Porntep Khokhajaikiat
• Format: Article
• Language: English
• Published: Khon Kaen University 2014-09-01
• Series: KKU Engineering Journal
• Subjects: Defective items; The number of times of knife sharpening; The number of layers in fabric paving; Fabric cutting process
• Online Access: https://www.tci-thaijo.org/index.php/kkuenj/article/download/22502/19264

This research aims to study the factors affecting the crooked fabric cutting and to present the new cutting procedure that complies with the factors affecting the crooked fabric cutting of a case study. The defect in fabric cutting process was crooked fabric making nonconforming product. The cause and effect diagram was utilized to analyze and suggest related factors leading to the problem. It was showed that the number of times of knife sharpening and the number of layers in fabric paving would affect the crooked fabric cutting the design of experiment was applied to determine appropriate the level of these factors. The main factor significantly affected the crooked fabric cutting (p < 0.05) was the number of times of knife sharpening, but the number of layers in fabric paving and interaction between both factors would not significantly affect the crooked fabric cutting. The number of times of knife sharpening in the level 4 had been sharpened twenty times in each cutting round. The least average defective proportion was 0.0173. Then the new cutting procedure would significantly reduce average defective proportion. It could reduce the average number of defective items as 5.74 pieces in each cutting round or 70.52 percents.