Residual welding stress of I-section members beyond the limits of width-thickness ratio
Despite the extensive studies on the effect of width-thickness ratio and residual stress on member behavior, few scholars have probed into the residual stress distribution on the I-section members. Based on the principle of blind hole drilling, this paper conducts an experimental study of the resid...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Gruppo Italiano Frattura
2017-06-01
|
| Series: | Frattura ed Integrità Strutturale |
| Subjects: | |
| Online Access: | https://www.fracturae.com/index.php/fis/article/view/1904 |
| Summary: | Despite the extensive studies on the effect of width-thickness ratio and residual stress on member behavior, few scholars have probed into the residual stress distribution on the I-section members. Based on the principle of blind hole drilling, this paper conducts an experimental study of the residual welding stresses of eight welded I-shaped members. Through the analysis of the test results, the author draws the following conclusion: it is safe to use I-section members beyond the limits of width-thickness ratio because the residual stress distribution is not severely affected by width-thickness ratio.
|
|---|---|
| ISSN: | 1971-8993 |