Drag Reduction Properties of Nanofluids in Microchannels

• Main Authors: H.A. Abdulbari, F.L.W. Ming
• Format: Article
• Language: English
• Published: Sultan Qaboos University 2015-12-01
• Series: The Journal of Engineering Research
• Subjects: microchannels, pressure drop, drag reduction, nanopowder additives.
• Online Access: https://journals.squ.edu.om/index.php/tjer/article/view/164

An experimental investigation of the drag reduction (DR) individualities in different sized micro channels was carried out with nanopowder additives (NAs) (bismuth(III) oxide, iron(II/III) oxide, silica, and titanium(IV) oxide) water suspensions/fluids. The primary objective was to evaluate the effects of various concentrations of NAs with different microchannel sizes (50, 100, and 200 µm) on the pressure drop of a system in a single phase. A critical concentration was observed with all the NAs, above which increasing the concentration was not effective. Based on the experimental results, the optimum DR percentages were calculated. The optimum percentages were found to be as follows: bismuth III oxides: ~65% DR, 200 ppm and a microchannel size of 100 µm; iron II/III oxides: ~57% DR, 300 ppm, and a microchannel size of 50 µm; titanium IV oxides: ~57% DR, 200 ppm, and a microchannel size of 50 µm, and silica: 55% DR, 200 ppm, and a microchannel size of 50 µm.