Inertia Compensation While Scanning Screw Threads on Coordinate Measuring Machines

Inertia Compensation While Scanning Screw Threads on Coordinate Measuring Machines

Bibliographic Details
Main Authors:	Kosarevsky Sergey, Latypov Viktor
Format:	Article
Language:	English
Published:	Sciendo 2010-01-01
Series:	Measurement Science Review
Subjects:	scanning cmm accuracy screw thread
Online Access:	https://doi.org/10.2478/v10048-010-0007-5

Similar Items

Development of an Algorithm to Detect Screw Threads in Planar Point Clouds
by: Kosarevsky Sergey, et al.
Published: (2010-01-01)

Coordinate Measuring Machine Probes Effect during Inner Thread Position Measurement
by: Ferencz Peti, et al.
Published: (2020-12-01)

Special Aspects of the Roller Screws Pieces Male Thread Pitch Diameters Control
by: D. S. Blinov, et al.
Published: (2014-01-01)

Influence of a Number of Screw and Nut Thread Starts of Planetary Roller-Screw Mechanisms on Their Main Parameters
by: D. S. Blinov, et al.
Published: (2016-12-01)

Finite element analysis of different configurations of fully threaded cannulated screw in the treatment of unstable femoral neck fractures
by: Jiantao Li, et al.
Published: (2018-10-01)

A General Case to Determine Dimensions and Their Tolerance Zones for the Thread Parts of Epicyclic Roller-Screw Mechanisms
by: D. S. Blinov, et al.
Published: (2017-01-01)

Incidence of Screw Loosening in Cortical Bone Trajectory Fixation Technique between Single- and Dual-Threaded Screws
by: Chao-Hsuan Chen, et al.
Published: (2021-09-01)

ANALYSIS OF Z-AXIS KINEMATICS INFLUENCE ON MEASUREMENT RESULT
by: Maciej Gruza, et al.
Published: (2015-05-01)

Finite Element Study of a Threaded Fastening: The Case of Surgical Screws in Bone
by: J. A. López-Campos, et al.
Published: (2018-08-01)

Mathematical Support and Software for Processing Results of Metrological Roller Screw Detail Measurements
by: D. S. Blinov, et al.
Published: (2015-01-01)

Comparison of the Pullout Strength of Pedicle Screws According to the Thread Design for Various Degrees of Bone Quality
by: Feng Shen, et al.
Published: (2019-04-01)

Half-threaded holes markedly increase the fatigue life of locking plates without compromising screw stability
by: Ching-Kong Chao, et al.
Published: (2020-10-01)

Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part II—Experimental Implementation
by: Roque Calvo, et al.
Published: (2016-10-01)

Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part I—Model Development
by: Roque Calvo, et al.
Published: (2016-09-01)

New developments in coordinate measuring machines for manufacturing industries
by: Hammad Mian S., et al.
Published: (2014-01-01)

Salvaging Pull-Out Strength in a Previously Stripped Screw Site: A Comparison of Three Rescue Techniques
by: Francesco Addevico, et al.
Published: (2021-08-01)

Thread Modification Method for Load Balance on Planetary Roller Screw Mechanism
Published: (2018-08-01)

Partial Threading of Pedicle Screws in a Standard Construct Increases Fatigue Life: A Biomechanical Analysis
by: Fon-Yih Tsuang, et al.
Published: (2021-02-01)

Devices for mounting self drilling metal screws
by: Liudmyla Danylova, et al.
Published: (2019-04-01)

On the Effect of Thread Turn Profile Angle of the Planetary Roller-Screw Mechanism Parts on Their Basic Parameters
by: D. S. Blinov, et al.
Published: (2016-01-01)

Improved Particle Swarm Optimization Algorithm Based on a Three-Dimensional Convex Hull for Fitting a Screw Thread Central Axis
by: Lihua Lei, et al.
Published: (2021-01-01)

General Case in Determining Center-To-Center Spacing Between the Screw and the Roller in a Roller Drive, and Initial Contact Point of Their Mating Thread Turns. Development of Calculation Method and Software
by: D. S. Blinov, et al.
Published: (2017-08-01)

Development and Validation of Threaded Fastener Test Rig
by: Wirström, Fredrik
Published: (2019)

The Effects of Geometrical Parameters of the Pedicle Screw on Its Pullout Strength: In-Vitro Animal Tests
by: Sheida Vafadar, et al.
Published: (2017-09-01)

Adjusting the size of the rope thread in the machining of dimensional tool
by: S. S. Nekrasov, et al.
Published: (2016-12-01)

Decreased complications but a distinctive fixation loosening mechanism of fully threaded headless cannulated screw fixation for femoral neck fractures in young adults
by: Hui Sun, et al.
Published: (2021-03-01)

The Automated Threaded Fastening Based on On-line Identification
by: Nicolas Ivan Giannoccaro, et al.
Published: (2008-11-01)

COORDIANATE MEASURMENT SYSTEMS CMM AND CMA – CHARACTERISTC AND METHODS OF THEIR ACCURACY EVALUATION
by: Magdalena Kupiec
Published: (2012-12-01)

Hob Identification Methods
by: Andrzej Piotrowski
Published: (2018-03-01)

A New Compensation Method for Measurement of Thread Pitch Diameter by Profile Scanning
by: Sheng Chen, et al.
Published: (2014-12-01)

On Working Capacity Criteria for Screw-Roller Mechanisms
by: D. S. Blinov, et al.
Published: (2015-01-01)

The Analysis of Design Parameters of Thread Milling Cutters
by: O. V. Malkov, et al.
Published: (2015-01-01)

Can barb thread design improve the pullout strength of bone screws?: a biomechanical study and finite element explanation
by: Xiaoreng Feng, et al.
Published: (2021-02-01)

Roles of the screw types, proximity and anterior band wiring in the surgical fixation of transverse patellar fractures: a finite element investigation
by: Chih-Hsien Chen, et al.
Published: (2019-03-01)

Determination of the Tapping Part Diameter of the Thread Mill
by: A. E. Dreval', et al.
Published: (2015-01-01)

HIGH PERFORMANCE TAPS FOR CUTTING THREADS IN DIFFICULT TO MACHINE MATERIALS
by: M. R. Akhmedova, et al.
Published: (2017-03-01)

The golden thread
by: Sutton, Jordan Thomas
Published: (2012)

The golden thread
by: Sutton, Jordan Thomas
Published: (2012)

Prediction of bending moment resistance of screw connected joints in plywood members using regression models and compare with that commercial medium density fiberboard (MDF) and particleboard
by: Sadegh Maleki, et al.
Published: (2014-11-01)

Analysis of Sheet Metal Tapping Screw Fabrication Using a Finite Element Method
by: Shao-Yi Hsia, et al.
Published: (2016-10-01)