| Summary: | Titanium alloys are used in aerospace and automotive applications because of its high specific strength, stiffness and good machinability but its wear resistance is inadequate. To eliminate this property lag Boron Carbide (B4C) ceramic particles are reinforced with Ti-6Al-4V through powder metallurgy route (PM). Reinforcement particles are mixed with base alloy for the weight percentage of 0, 5 and 10 so as to analyse the effect of reinforcements on mechanical, corrosion and wear properties. This research outcome corresponds to decreased density, increased hardness and corrosion resistance capability for significant increase in B4C content of the newer composite developed and tested. Applied load signify higher effect on wear performance of the composite specimens followed by B4C addition percentage. Scanning Electron Microscope results reveal that B4C reinforced Ti-6Al-4V composite comprise for higher wear resistance and illustrate mild worn surface when compared to that of unreinforced Ti alloy. Keywords: Ti MMC, Boron carbide, Powder metallurgy, Corrosion, Wear
|
|---|
