Evaluation of Strains and Thicknesses of Pipe Elbows on the Basis of Expressions Resulting from the Eudirective for the Case of Large and Small Deformations

• Main Author: Śloderbach Z.
• Format: Article
• Language: English
• Published: Sciendo 2017-12-01
• Series: International Journal of Applied Mechanics and Engineering
• Subjects: eu directive; required thicknesses of pipe elbows; pipe bending processes; relative and logarithmic measures of deformation; required initial thickness of a bent tube
• Online Access: https://doi.org/10.1515/ijame-2017-0073

The relations to calculate the maximum value of strains in processes of bending tubes on benders, in stretched layers of tubes, are presented in this work on the basis of the EU-Directive concerning production of pressure equipment. It has been shown that for large deformations that occur during bending of the pipes on knees, logarithmic strain measures (real) and relative strain measures give different values of strain but equal wall thicknesses in the bending zone. Logarithmic measures are frequently used in engineering practice and are valid for large and small deformations. Reverse expressions were also derived to calculate the required initial wall thickness of the tube to be bent, in order to obtain the desired wall thickness of the knee after bending.