Effect of Stress-Relieving Heat Treatment on the High Strain Rate Dynamic Compressive Properties of Additively Manufactured Ti6Al4V (ELI)

Effect of Stress-Relieving Heat Treatment on the High Strain Rate Dynamic Compressive Properties of Additively Manufactured Ti6Al4V (ELI)

A study was undertaken on the compressive high strain rate properties and deformation behaviour of Direct Metal Laser-Sintered (DMLS) Ti6Al4V (ELI) parts in two separate forms: as-built (AB) and stress relieved (SR). The high strain rate compression tests were carried out using a Split Hopkinson Pre...

Full description

Bibliographic Details
Main Authors:	Amos Muiruri, Maina Maringa, Willie du Preez, Leonard Masu
Format:	Article
Language:	English
Published:	MDPI AG 2020-05-01
Series:	Metals
Subjects:	direct metal laser sintering Ti6Al4V (ELI) dynamic properties Split Hopkinson Pressure Bar flow stress fracture strain
Online Access:	https://www.mdpi.com/2075-4701/10/5/653

Similar Items

High Strain Rate Properties of Various Forms of Ti6Al4V(ELI) Produced by Direct Metal Laser Sintering
by: Amos Muiruri, et al.
Published: (2021-08-01)

Evaluation of Dislocation Densities in Various Microstructures of Additively Manufactured Ti6Al4V (Eli) by the Method of X-ray Diffraction
by: Amos Muiruri, et al.
Published: (2020-11-01)

Behavior of high-density polyethylene at high strain rates
by: Trnka J., et al.
Published: (2021-06-01)

Crystallographic Texture Analysis of As-Built and Heat-Treated Ti6Al4V (ELI) Produced by Direct Metal Laser Sintering
by: Amos Muiruri, et al.
Published: (2020-08-01)

The energy evolution characteristics of coal under different dynamic strain rates and confining pressures
by: Lu Yi-Qiang, et al.
Published: (2019-01-01)

Numerical Simulation of the Taylor Impact Test for Laser Powder Bed Fusion Parts Based on Microstructural Internal State Variables
by: du Preez, W., et al.
Published: (2023)

Static and Dynamic Compressive Stress-Strain Behavior of Recycled Tire Crumb Rubber Mortar
by: Manjuan Yang, et al.
Published: (2020-10-01)

Effect of CNTs Additives on the Energy Balance of Carbon/Epoxy Nanocomposites during Dynamic Compression Test
by: Manel Chihi, et al.
Published: (2020-01-01)

Correction Procedure of Wave Signals for a Viscoelastic Split Hopkinson Pressure Bar
by: Jacek JANISZEWSKI, et al.
Published: (2016-03-01)

Tensile Split Hopkinson Bar Technique: Numerical Analysis of the Problem of Wave Disturbance and Specimen Geometry Selection
by: Panowicz Robert, et al.
Published: (2016-09-01)

Influence of Imperfect Position of a Striker and Input Bar on Wave Propagation in a Split Hopkinson Pressure Bar (SHPB) Setup with a Pulse-Shape Technique
by: Robert Panowicz, et al.
Published: (2020-04-01)

Deformation Mechanism and Structural Changes in the Globular Ti-6Al-4V Alloy under Quasi-Static and Dynamic Compression: To the Question of the Controlling Phase in the Deformation of α+β Titanium Alloys
by: Dekhtyar, O., et al.
Published: (2022)

Dynamic Behaviors of Mortar Reinforced with NiTi SMA Fibers under Impact Compressive Loading
by: Eusoo Choi, et al.
Published: (2021-08-01)

Structure and Compressive Properties of Invar-Cenosphere Syntactic Foams
by: Dung Luong, et al.
Published: (2016-02-01)

High strain rate compressive strength behavior of cemented paste backfill using split Hopkinson pressure bar
by: Xin Chen, et al.
Published: (2021-05-01)

Dynamic Properties of Strain-Hardening Cementitious Composite Reinforced with Basalt and Steel Fibers
by: Na Zhang, et al.
Published: (2020-06-01)

Mechanical Characterization of Different Aluminium Foams at High Strain Rates
by: Ana M. Amaro, et al.
Published: (2019-05-01)

CHARACTERISATION AND MONITORING OF TI6AL4V (ELI) POWDER USED IN DIFFERENT SELECTIVE LASER MELTING SYSTEMS
by: Thejane, Kekeletso, et al.
Published: (2017-11-01)

Properties and Structure of X30MnAlSi26-4-3 High Strength Steel Subjected to Dynamic Compression Processes
by: Śmiglewicz A., et al.
Published: (2017-12-01)

Synthesis and Electrochemical Characterisation of Magnetite Coatings on Ti6Al4V-ELI
by: Adriana Montiel, et al.
Published: (2020-12-01)

In-Situ Damage Evaluation of Pure Ice under High Rate Compressive Loading
by: Matti Isakov, et al.
Published: (2019-04-01)

Experimental and numerical study of failure behavior and mechanism of coal under dynamic compressive loads
by: Junjun Feng, et al.
Published: (2020-09-01)

Modeling and Design of SHPB to Characterize Brittle Materials Under Compression for High Strain Rates
by: Tomasz Jankowiak, et al.
Published: (2020-05-01)

Identification of the Quasi-Static and Dynamic Behaviour of Projectile-Core Steel by Using Shear-Compression Specimens
by: Yannick Duplan, et al.
Published: (2019-02-01)

An Experimental Investigation of the Behavior of Strain-Hardening Cement-Based Composites (SHCC) under Impact Compression and Shear Loading
by: Ali A. Heravi, et al.
Published: (2020-10-01)

Dynamic Mechanical Response and Damage Mechanism of HTPB Propellant under Impact Loading
by: Hengning Zhang, et al.
Published: (2020-07-01)

Strain Rate Effect on the Mechanical Properties and Fracture Surface Roughness of Sandstone Subjected to Dynamic Direct Tension
by: Yanlong Chen, et al.
Published: (2020-01-01)

A novel methodology for large strain under intermediate strain rate loading
by: H. He, et al.
Published: (2021-05-01)

Dynamic High Strain Rate Characterization of Lithium-ion Nickel–Cobalt–Aluminum (NCA) Battery Using Split Hopkinson Tensile/Pressure Bar Methodology
by: Hafiz Fadillah, et al.
Published: (2020-09-01)

Etude expérimentale du frottement entre l’acier et un matériau fragile sous haute vitesse et haute pression
by: Durand, Bastien
Published: (2013)

Dynamic compressive behavior of recycled aggregate concrete based on split Hopkinson pressure bar tests
by: Yubin Lu, et al.

On the study of the dynamic response in 3D additively manufactured auxetic structures
by: Fjeldberg Niklas, et al.
Published: (2021-01-01)

A constitutive model for particulate-reinforced titanium matrix composites subjected to high strain rates and high temperatures
by: Song Wei-Dong, et al.
Published: (2013-01-01)

A New S-Shape Specimen for Studying the Dynamic Shear Behavior of Metals
by: Ali Arab, et al.
Published: (2019-07-01)

High-Stress Compressive Creep Behavior of Ti-6Al-4V ELI Alloys with Different Microstructures
by: Dan Zhenhua, et al.
Published: (2020-01-01)

Dynamic Mechanical and Microstructural Properties of Outburst-Prone Coal Based on Compressive SHPB Tests
by: Zhenhua Yang, et al.
Published: (2019-11-01)

Experimental and numerical analysis of stress wave propagation in polymers and the role of interfaces in armour systems
by: Gorwade Chandragupt, et al.
Published: (2012-12-01)

Analysis of surface roughness and cutting force during turning of Ti6Al4V ELI in dry environment
by: V. G. Sargade, et al.
Published: (2016-04-01)

Laser Surface Texturing and Electropolishing of CoCr and Ti6Al4V-ELI Alloys for Biomedical Applications
by: Jesús A. Sandoval-Robles, et al.
Published: (2020-11-01)

HIGH CYCLE FATIGUE PROPERTIES OF AS-BUILT TI6AL4V (ELI) PRODUCED BY DIRECT METAL LASER SINTERING
by: Malefane, Lerata Botsane, et al.
Published: (2017-11-01)

Cannot write session to /tmp/vufind_sessions/sess_ovbsn99ad1k8dnv690rrg6biae