| Summary: | The paper presents a computationally effective method for fault detection. A system's responses are measured under healthy and ill conditions. These signals are used to calculate so-called signature functions that create a signal space. The current system's response is projected into this space. The signal location in this space easily allows to determine the fault. No classifier such as a neural network, hidden Markov models, etc. is required. The advantage of this proposed method is its efficiency, as computing projections amount to calculating dot products. Therefore, this method is suitable for real-time embedded systems due to its simplicity and undemanding processing capabilities which permit the use of low-cost hardware and allow rapid implementation. The approach performs well for systems that can be considered linear and stationary. The communication presents an application, whereby an industrial process of moulding is supervised. The machine is composed of forms (dies) whose alignment must be precisely set and maintained during the work. Typically, the process is stopped periodically to manually control the alignment. The applied algorithm allows on-line monitoring of the device by analysing the acceleration signal from a sensor mounted on a die. This enables to detect failures at an early stage thus prolonging the machine's life.
|
|---|
