| Summary: | Samples of EUFROFER, a reduced activation ferritic martensitic steel, were exposed in the linear plasma device Pilot-PSI to a deuterium (D) plasma with incident ion energy of ∼40eV and incident D flux of 2–6×1023D/m2s to fluences up to 1027D/m2 at surface temperatures ranging from 400K to 950K. The main focus of the study lays on the surface morphology changes dependent on the surface temperature and the surface composition evolution, e.g., the enrichment in tungsten; but also the erosion and the D retention are studied. The created surface morphology varies strongly with surface temperature from needle-like to corral-like structures. The visible lateral length scale of the formed structures is in the range of tens of nanometres to above 1µm and exhibits two thermal activated regimes below and above ∼770K with activation energies of 0.2eV and 1.3eV, respectively. The lateral variation of the enrichment of heavy elements on the surface is correlated to this surface morphology at least in the high temperature regime, independent of the origin of the enrichment (intrinsic from the sample or deposited by the plasma). Also the erosion exhibits temperature dependence at least above ∼770K as well as a fluence dependence. The amount of deuterium retained in the top 500nm is almost independent of the exposure temperature and is of the order of 1018D/m2, which would correspond to a sub-monolayer D coverage on the surface. The retained D in the volume summing up over the complete samples exceeds the D retained close to the surface by one order of magnitude. Keywords: Plasma facing material, Surface morphology, Erosion, Steel, Plasma exposure
|
|---|
