Forming the structure and the properties of electric arc coatings based on high manganese steel alloyed with titanium and niobium carbides

Forming the structure and the properties of electric arc coatings based on high manganese steel alloyed with titanium and niobium carbides

The formation of the phase composition, structure, and properties of electric-arc coatings by electrode materials based on high-manganese austenite steel, which is strengthened by twinning steel alloyed by titanium and niobium carbides, was studied. Hardfacing alloys were applied using flux-cored ar...

Full description

Bibliographic Details
Main Authors:	Shihab Thaer Abdulwahhab Shihab, Pavlo Prysyazhnyuk, Roman Andrusyshyn, Lyubomyr Lutsak, Olexandr Ivanov, Igor Tsap
Format:	Article
Language:	English
Published:	PC Technology Center 2020-02-01
Series:	Eastern-European Journal of Enterprise Technologies
Subjects:	flux-core wire high-manganese steel niobium carbide titanium carbide deformation strengthening abrasive wear arc welding
Online Access:	http://journals.uran.ua/eejet/article/view/194164

Similar Items

Changes in Abrasive Wear Resistance during Miller Test of High-Manganese Cast Steel with Niobium Carbides Formed in the Alloy Matrix
by: Grzegorz Tęcza
Published: (2021-05-01)

Heat-Resistance of the Powder Cobalt Alloys Reinforced by Niobium or Titanium Carbide
by: Cherepova, T.S., et al.
Published: (2016-01-01)

Characterisation of CVD Niobium Carbide Coatings on Hard Carbide Substrate
by: Stela CONSTANTINESCU, et al.
Published: (2012-03-01)

Surface characterization of alumina reinforced with niobium carbide obtained by polymer precursor
by: Wilson Acchar, et al.
Published: (2006-09-01)

Comparative analysis of niobium and vanadium carbide efficiency in the high energy mechanical milling of aluminum bronze alloy
by: Alexandre Nogueira Ottoboni Dias, et al.

Microstructure, morphology, adhesion and tribological behavior of sputtered niobium carbide and bismuth films on tool steel
by: Laura Angélica Ardila Rodríguez, et al.
Published: (2014-09-01)

Development of the composite material and coatings based on niobium carbide
by: Pavlo Prysyazhnyuk, et al.
Published: (2018-12-01)

Niobium carbide (MXene) reduces UHMWPE particle-induced osteolysis
by: Kuo-Yang Sun, et al.
Published: (2022-02-01)

Preparation and Reactivity of Niobium-Containing Hydrotreating Catalysts
by: Schwartz, Viviane
Published: (2014)

Niobium carbide synthesis by solid-gas reaction using a rotating cylinder reactor
by: F. A. O. Fontes, et al.
Published: (2004-09-01)

Tribocorrosion Behavior of Niobium-Based Thin Films for Biomedical Applications
by: P. Guzman, et al.
Published: (2018-12-01)

In situ formation of molybdenum borides at hardfacing by arc welding with flux-cored wires containing a reaction mixture of B4C/Mo
by: Pavlo Prysyazhnyuk, et al.
Published: (2020-08-01)

Mechanical performance of alumina reinforced with NbC, TiC and WC
by: Wilson Acchar, et al.
Published: (2012-12-01)

Fabrication and Characterization of Polymer Blend Doped With Metal Carbide Nanoparticles for Humidity Sensors
by: Ahmed Mohaisen, et al.
Published: (2019-04-01)

Compositos a base de Alsub(2)Osub(3) com adicoes de NbC e de MgO
by: TONELLO, KAROLINA P. dos S.
Published: (2009)

Compositos a base de Alsub(2)Osub(3) com adicoes de NbC e de MgO
by: TONELLO, KAROLINA P. dos S.
Published: (2009)

Critical cooling rate on carbide precipitation during quenching of austenitic manganese steel
by: Youn-Soo Ham, et al.
Published: (2010-05-01)

Chromium carbide micro-whiskers dataset: Morphologies with scanning and transmission electronic microscopy
by: Chenxi Zhai, et al.
Published: (2020-10-01)

Fatigue behavior and life prediction of a silicon carbide/titanium-24aluminum-11niobium composite under isothermal conditions
by: Bartolotta, Paul Anthony
Published: (1991)

Microstructure and mechanical properties of WC-Co reinforced with NbC
by: Wilson Acchar, et al.
Published: (2004-09-01)

Niobium-Containing DLC Coatings on Various Substrates for Strain Gauges
by: Maria Grein, et al.
Published: (2019-06-01)

The influence of manganese for structure of high-chromium white cast iron
by: V.V. Netrebko
Published: (2012-12-01)

Physical Properties of the NbC Carbide
by: Marcio Gustavo Di Vernieri Cuppari, et al.
Published: (2016-10-01)

Low-temperature synthesis of silicon carbide powder using shungite
by: Agnieszka Gubernat, et al.
Published: (2017-01-01)

Near-Infrared Spatial Self-Phase Modulation in Ultrathin Niobium Carbide Nanosheets
by: Si Xiao, et al.
Published: (2021-05-01)

Influence of Hardness, Matrix and Carbides in Combination with Nitridation on Abrasive Wear Resistance of X210Cr12 Tool Steel
by: Martin Orečný, et al.
Published: (2016-10-01)

Characterization of the Micro-Abrasive Wear in Coatings of TaC-HfC/Au for Biomedical Implants
by: Pablo Guzmán, et al.
Published: (2017-07-01)

Studies at elevated temperatures of metal-ceramic systems composed of nickel and a solid solution of tantalum and niobium carbides in titanium carbide /
by: Newkirk, Herbert William
Published: (1956)

Microstructure and Abrasive Wear Resistance of Metal Matrix Composite Coatings Deposited on Steel Grade AISI 4715 by Powder Plasma Transferred Arc Welding Part 2. Mechanical and Structural Properties of a Nickel-Based Alloy Surface Layer Reinforced with Particles of Tungsten Carbide and Synthetic Metal–Diamond Composite
by: Artur Czupryński
Published: (2021-05-01)

Microstructure and Abrasive Wear Resistance of Metal Matrix Composite Coatings Deposited on Steel Grade AISI 4715 by Powder Plasma Transferred Arc Welding Part 1. Mechanical and Structural Properties of a Cobalt-Based Alloy Surface Layer Reinforced with Particles of Titanium Carbide and Synthetic Metal–Diamond Composite
by: Artur Czupryński
Published: (2021-05-01)

Characterization of Sintered Aluminium Reinforced with Ultrafine Tungsten Carbide Particles
by: Omid Emadinia, et al.
Published: (2020-10-01)

Wear Mechanisms and Wear Model of Carbide Tools during Dry Drilling of CFRP/TiAl6V4 Stacks
by: Unai Alonso Pinillos, et al.
Published: (2019-09-01)

TEM study of a hot-pressed Al2O3-NbC composite material
by: Wilson Acchar, et al.
Published: (2005-03-01)

The effect of tungsten carbide particles content in a weld deposit on its abrasion resistance
by: Ivo Hlavatý, et al.
Published: (2017-01-01)

Effect of austempering temperature on microstructure and mechanical properties of ductile cast iron modified by niobium
by: Wilson Sckudlarek, et al.
Published: (2021-05-01)

Microstructural Changes in a High-Manganese Austenitic Fe-Mn-Al-C Steel
by: Witkowska M., et al.
Published: (2014-10-01)

Carbides and Nitrides of Zirconium and Hafnium
by: Sergey V. Ushakov, et al.
Published: (2019-08-01)

The dissolution behavior of carbides in aqueous environments /
by: Payer, J. H.
Published: (1971)

Physical adsorption on crystalline titanium carbide
by: Varsanik, Richard George
Published: (2009)

Precipitation of Carbides in a Ni-based Superalloy
by: Singh Handa, Sukhdeep
Published: (2014)