Effect of cutting speed parameters on the surface roughness of Al5083 due to recrystallization
In the present study, the effect of machining parameters and recrystallization on surface quality of Al5083 has been investigated. In order to achieve minimum surface roughness of aluminum 5083 samples, statistical test design method of "full factorial" was used. In order to achieve th...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Copernicus Publications
2016-03-01
|
| Series: | Mechanical Sciences |
| Online Access: | https://www.mech-sci.net/7/85/2016/ms-7-85-2016.pdf |
| id |
doaj-64ceba017ef24dbdaa15543e01988f43 |
|---|---|
| record_format |
Article |
| spelling |
doaj-64ceba017ef24dbdaa15543e01988f432020-11-24T23:49:39ZengCopernicus PublicationsMechanical Sciences2191-91512191-916X2016-03-017859110.5194/ms-7-85-2016Effect of cutting speed parameters on the surface roughness of Al5083 due to recrystallizationE. Rezvani0H. Ghayour1M. Kasiri2Department of Mechanical Engineering, Faculty of Engineering, Najafabad Branch, Islamic Azad University, Najafabad, IranAdvanced Materials Research Center, Faculty of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, lranAdvanced Materials Research Center, Faculty of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, lranIn the present study, the effect of machining parameters and recrystallization on surface quality of Al5083 has been investigated. In order to achieve minimum surface roughness of aluminum 5083 samples, statistical test design method of "full factorial" was used. In order to achieve the phenomenon of recrystallization, aluminum 5083 samples were set under 50 % cold rolling mechanical operations. Then, the rolled samples were annealed for 2.5 to 240 min at 250 °C. The stress-strain curves were obtained from tensile tests. Then, dry machining was carried out on the original and crystallized samples under the same conditions. Results of surface roughness, tensile, and microstructure tests indicated the reduction of surface roughness in the crystallized sample.https://www.mech-sci.net/7/85/2016/ms-7-85-2016.pdf |
| collection |
DOAJ |
| language |
English |
| format |
Article |
| sources |
DOAJ |
| author |
E. Rezvani H. Ghayour M. Kasiri |
| spellingShingle |
E. Rezvani H. Ghayour M. Kasiri Effect of cutting speed parameters on the surface roughness of Al5083 due to recrystallization Mechanical Sciences |
| author_facet |
E. Rezvani H. Ghayour M. Kasiri |
| author_sort |
E. Rezvani |
| title |
Effect of cutting speed parameters on the surface roughness of Al5083 due to recrystallization |
| title_short |
Effect of cutting speed parameters on the surface roughness of Al5083 due to recrystallization |
| title_full |
Effect of cutting speed parameters on the surface roughness of Al5083 due to recrystallization |
| title_fullStr |
Effect of cutting speed parameters on the surface roughness of Al5083 due to recrystallization |
| title_full_unstemmed |
Effect of cutting speed parameters on the surface roughness of Al5083 due to recrystallization |
| title_sort |
effect of cutting speed parameters on the surface roughness of al5083 due to recrystallization |
| publisher |
Copernicus Publications |
| series |
Mechanical Sciences |
| issn |
2191-9151 2191-916X |
| publishDate |
2016-03-01 |
| description |
In the present study, the effect of machining parameters and
recrystallization on surface quality of Al5083 has been investigated. In
order to achieve minimum surface roughness of aluminum 5083 samples,
statistical test design method of "full factorial" was used. In order to
achieve the phenomenon of recrystallization, aluminum 5083 samples were set
under 50 % cold rolling mechanical operations. Then, the rolled samples
were annealed for 2.5 to 240 min at 250 °C. The stress-strain curves
were obtained from tensile tests. Then, dry machining was carried out on the
original and crystallized samples under the same conditions. Results of
surface roughness, tensile, and microstructure tests indicated the reduction
of surface roughness in the crystallized sample. |
| url |
https://www.mech-sci.net/7/85/2016/ms-7-85-2016.pdf |
| work_keys_str_mv |
AT erezvani effectofcuttingspeedparametersonthesurfaceroughnessofal5083duetorecrystallization AT hghayour effectofcuttingspeedparametersonthesurfaceroughnessofal5083duetorecrystallization AT mkasiri effectofcuttingspeedparametersonthesurfaceroughnessofal5083duetorecrystallization |
| _version_ |
1725481368294522880 |