Anatomical, physical, and mechanical properties of four pioneer species in Malaysia

• Main Authors: H. Hamdan, A. S. Nordahlia, U. M. K. Anwar, M. Mohd Iskandar, M. K. Mohamad Omar, Tumirah K
• Format: Article
• Language: English
• Published: SpringerOpen 2020-09-01
• Series: Journal of Wood Science
• Subjects: Anatomical properties; Physical properties; Mechanical properties; Pioneer species; Correlation; Low density
• Online Access: http://link.springer.com/article/10.1186/s10086-020-01905-z
• ISSN: 1435-0211; 1611-4663

Abstract The purpose of this study is to evaluate the anatomical, physical, and mechanical properties of four pioneer species, i.e., batai (Paraserianthes moluccana), ludai (Sapium baccatum), mahang (Macaranga gigantea), and sesendok (Endospermum malaccense). Correlation of factors influencing density, shrinkage, and mechanical properties were also discussed. Samples were obtained from the Forest Research Institute Malaysia (FRIM) campus. From the result obtained, these four pioneer species characterised by medium-to-large vessel with absent of tyloses and gum deposit, fine ray, thin walled fibre, runkel ratio less than 1.0, low in density, and mechanical properties. Sesendok has significantly higher value in fibre length, fibre diameter, fibre lumen diameter, fibre wall thickness, vessel diameter, density, MOR, MOE, compression parallel to grain, and shear parallel to grain compared to the other three pioneer species which were 2001 µm, 45 µm, 35 µm, 5.1 µm, 300 µm, 514 kg/m3, 79.5 N/mm2, 9209 N/mm2, 38.7 N/mm2, and 10.1 N/mm2, respectively. Between these four pioneer species, ludai has significantly higher in runkel ratio which was 0.57, whereas mahang shows significantly higher in slenderness ratio and number of vessels/mm2 which were 50.2 and 5 vessel/mm2, respectively. On the other hand, batai has higher tangential, radial and longitudinal shrinkage compared to ludai, mahang, and sesendok which were 3.0%, 2.4%, and 0.8%, respectively. Based on the basic property study, batai, ludai, mahang, and sesendok could be suitable for pulp and paper, plywood, light construction, furniture, interior finishing, and general utility. Fibre length, fibre wall thickness, and vessel diameter correlated significantly with density and mechanical properties. Shrinkage and mechanical properties were significantly influenced by density.