Electromagnetic radiation shielding composite coatings based on powdered alumina and ironoxide

The  article  presents  the  results  of  experimental  substantiation  of  the  method  for  improving the shielding  properties  of  composite  coatings  based  on  powdered  alumina  (electrocorundum,  alum  earth), which  consists  in  modifying  the  composition  of  such  coatings  by adding ...

Full description

Bibliographic Details
Main Authors: D. I. Penialosa Ovalies, O. V. Boiprav, M. V. Tumilovich, L. M. Lynkou
Format: Article
Language:Russian
Published: Educational institution «Belarusian State University of Informatics and Radioelectronics» 2021-06-01
Series:Doklady Belorusskogo gosudarstvennogo universiteta informatiki i radioèlektroniki
Subjects:
Online Access:https://doklady.bsuir.by/jour/article/view/3086
Description
Summary:The  article  presents  the  results  of  experimental  substantiation  of  the  method  for  improving the shielding  properties  of  composite  coatings  based  on  powdered  alumina  (electrocorundum,  alum  earth), which  consists  in  modifying  the  composition  of  such  coatings  by adding  to  it  powdered  iron  oxide. This experimental substantiation consisted in the development of the technique for obtaining composite coatings based on powdered alumina and iron oxide, the manufacture of the experimental samplesusing the developed technique,  measurements  of  electromagnetic  radiation  reflection and  transmission  coefficients  values in the frequency range 0.7…17.0 GHz of the manufactured samples; implementation of the comparative analysis of the measured values with the similar values typical for the composite coatings filled with powdered alumina oxides, and composite coatings with the fillers such as powdered iron oxide. The obtained results revealed that by  adding  powdered  iron  oxide  to  the  composite  coatings  based  on powdered  alumina  oxides,  it  is  possible to reduce by 1.0…8.0 dB their electromagnetic radiation transmission coefficient values in the frequency range 0.7…17.0 GHz. In addition, we found that the implementation of the proposed method allows one to decrease by  2.0…20.0  dB  the  electromagnetic  radiation  reflection  coefficient  values  in  the  specified  frequency  range of the considered composite coatings, if such are applied to metal substrates. We propose to use the composite coatings, obtained on the base of the substantiated method, in order to ensure the electromagnetic compatibility of radio-electronic equipment.
ISSN:1729-7648