Complex petrophysical correction in the adaptation of geological hydrodynamic models (on the example of Visean pool of Gondyrev oil field)

• Main Authors: Repina V.A., Galkin V.I., Galkin S.V.
• Format: Article
• Language: English
• Published: Saint-Petersburg Mining University 2018-06-01
• Series: Zapiski Gornogo Instituta
• Subjects: core samples; porosity; density; permeability; multiple regression; 3D hydrodynamic model; porous collector; adaptation; well; oil production
• Online Access: http://pmi.spmi.ru/index.php/pmi/article/view/6413
• ISSN: 2411-3336; 2541-9404

The authors review a method of combined porosity and volume density correction in the process of modeling the distribution of reservoir permeability. Basing on petrophysical investigations of core samples from Bashkir fold deposits, an association between rock porosity, density and permeability has been analyzed. Significant correlation has been observed for the above mentioned parameters in porous collectors in contrast to reduced correlation for dense rocks and intervals of anomalously high poroperm characteristics. For terrigene porous collectors the authors propose a model of permeability assessment based on combined porosity and density correction. A modified model was developed for Visean pool of Gondyrev oil field, where collector permeability had been calculated as a function of rock porosity and density. The modified model has been compared to the conventional one; significant differences have been detected. In the modified version maximum permeability is associated with the southern part of the pool, whereas the conventional method points out the central part and predicts lowering permeability closer to the periphery. Geological model in the modified version is more homogenous than the conventional one and has no sharp peaks and valleys. The calculations have been made that reproduce the history of field development for both permeability volumes. Authors demonstrate that total oil production obtained using the modified model has a much better correlation with the actual data. The best results from using suggested method apply to the initial stage of development due to better convergence of high-rate wells. On the whole, comparison of two methods shows that for the purposes of production history adaptation the modified model is significantly better than the conventional one. Hence, the method of density correction allows for better justification of differences in the lithology of Visean collectors, which ultimately results in higher accuracy of data on residual oil reserves in the deposit.