| Summary: | On the basis of calculating the longitudinal force using the original brush model, we simplify the tire structure and consider the lateral force generated by the lateral elasticity of the tread. At the same time, the boundary conditions between the adhesion area and the slip zone in the contact area of the tire are fully discussed. By establishing an improved tire brush model, the error caused by neglecting the sideslip characteristics is avoided, and the adaptability of the tire model is improved. A double nonlinear compensation method based on the lateral acceleration deviation and the yaw rate deviation is employed to estimate the road adhesion coefficient, which is closer to the actual attachment situation than the standard calculation. Based on this model, the vehicle stability coefficient k is defined and calculated to describe the stability of the vehicle during the driving process. The modeling results show that the value of k is always in the stable range of [0, 1]. Therefore, the vehicle that utilizes the improved tire brush model is always within the controllable range in the driving process, which verifies the effectiveness of the model.
|
|---|
