Prediction and improvement of the solid particles transfer rate for the bulk handing system design of offshore drilling vessels
Numerous experiments with a scaled pilot facility were carried out to compare the relative bulk transfer performance of three special devices for applications to drilling systems. The pipe diameter for bulk transportation was 3 in., which corresponds to around half of the actual system dimensions. T...
Main Authors: | Mincheol Ryu, Dong Soo Jeon, Yooil Kim |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier
2015-11-01
|
Series: | International Journal of Naval Architecture and Ocean Engineering |
Subjects: | |
Online Access: | http://www.sciencedirect.com/science/article/pii/S2092678216300097 |
Similar Items
-
The effect of physical properties of bulk solid materialsT on modes of dense phase pneumatic conveying
by: Mainwaring, N. J.
Published: (1988) -
Heat transfer in gas-solids flows through pipes
by: Li, Jintang
Published: (2000) -
An investigation into the life cycle costs of a two-flight conveyor versus a single-flight conveyor by analysis of the system reliability, availability, maintainability and overall economic viability
by: Nkomonde, Noxolo
Published: (2014) -
SLUG FLOW VELOCITY ESTIMATION DURING PNEUMATIC CONVEYING OF BULK SOLID MATERIALS BASED ON IMAGE PROCESSING TECHNIQUES
by: Mateusz Miłak, et al.
Published: (2019-03-01) -
Pressure Loss Optimization to Reduce Pipeline Clogging in Bulk Transfer System of Offshore Drilling Rig
by: Yongho Kim, et al.
Published: (2020-10-01)