Influence of Residual Stresses on Geometric Parameters of Surface-Strengthened Beam

Influence of Residual Stresses on Geometric Parameters of Surface-Strengthened Beam

The сomprehensive study of the formation of residual stresses and plastic deformations in prismatic samples of the EP742 alloy after ultrasonic hardening and their influence on the geometric parameters of the beam was conducted. Phenomenological model for the reconstruction of residual stress fields...

Full description

Bibliographic Details
Main Authors:	Radchenko, Vladimir P., Afanaseva, Olga S., Glebov, Victor E.
Format:	Article
Language:	English
Published:	Saratov State University 2019-12-01
Series:	Известия Саратовского университета. Новая серия. Серия Математика. Механика. Информатика
Subjects:	ultrasonic hardening flat specimens residual stresses reconstruction change in geometric parameters experimental data
Online Access:	https://mmi.sgu.ru/sites/mmi.sgu.ru/files/text-pdf/2020/04/464-478radchenko_et_al.pdf

Similar Items

Calculation and Selection of Flat-Plate Solar Collector Geometric Parameters with Thermosiphon Circulation
by: Yedilkhan Amirgaliyev, et al.
Published: (2018-11-01)

Kinetics of the stress-strain state of surface hardened cylindrical specimen under complex stress state of creep
by: Vladimir P. Radchenko, et al.
Published: (2014-03-01)

Acoustic horn design for joining metallic wire with flat metallic sheet by ultrasonic vibrations
by: Pradeep Kumar J, et al.
Published: (2018-11-01)

On The Parameters of Geometric Constraints for Cracked Plates under Tension – Three-Dimensional Problems
by: Graba M.
Published: (2017-12-01)

Geometric Parameters Estimation and Calibration in Cone-Beam Micro-CT
by: Jintao Zhao, et al.
Published: (2015-09-01)

Residual stress provides significant strengthening and ductility in gradient structured materials
by: Mu-Xin Yang, et al.
Published: (2019-11-01)

RESEARCH OF GRINDING CONDITIONS EFFECT ON THRUST RACE GEOMETRICAL PARAMETERS
by: Olga P. Reshetnikova, et al.
Published: (2018-07-01)

RESEARCH OF GRINDING CONDITIONS EFFECT ON THRUST RACE GEOMETRICAL PARAMETERS
by: Olga P. Reshetnikova, et al.
Published: (2012-09-01)

Penentuan Parameter Geoteknik Tanah Residual Tropis Melalui Pengujian Dilatometer
by: Hadi U Moeno
Published: (2011-04-01)

Residual stresses relaxation in surface-hardened half-space under creep conditions
by: Vladimir P. Radchenko, et al.
Published: (2015-09-01)

Influence of Milling Parameters on Mechanical Properties of AA7075 Aluminum under Corrosion Conditions
by: María Jesús Martín, et al.
Published: (2018-09-01)

The Method of Reconstruction of Residual Stresses in a Prismatic Specimen with a Notch of a Semicircular Profile after Advanced Surface Plastic Deformation
by: Radchenko, Vladimir P., et al.
Published: (2020-11-01)

GEOMETRICAL PARAMETERS OF EGGS IN BIRD SYSTEMATICS
by: Mityay I.S., et al.
Published: (2014-12-01)

Mathematical modeling of creep and residual stresses relaxation in surface hardened elements of statically indefinable rod systems
by: Vladimir P. Radchenko, et al.
Published: (2018-12-01)

Experimental research of residual stresses kinetics in the hardened hollow cylindrical specimens of D16T alloy at the axial tension under the creep conditions
by: Vladimir P. Radchenko, et al.
Published: (2016-06-01)

Mathematical calculation model for geometrical parameters of timber mesh design with orthogonal grid
by: Loktev Dmitriy Aleksandrovich, et al.

Determination of Geometric Parameters of Space Steel Constructions
by: Jitka Suchá
Published: (2005-06-01)

Determination of geometrical parameters of the diamond gear hones for the finishing of gears
by: Michael Storchak, et al.
Published: (2019-11-01)

Effect of anisotropy of surface plastic hardening on formation of residual stresses in cylindrical samples with semicircular notch
by: Vladimir P. Radchenko, et al.
Published: (2016-12-01)

Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens
by: R. Hosseini, et al.
Published: (2018-03-01)

Development of design methodology of technological process of ball-rod hardening with account for formation of compressive residual stresses
by: M. A. Tamarkin, et al.
Published: (2020-07-01)

Residual stresses and fatigue resistance of toothed wheels
by: V. S. Vakulyuk, et al.
Published: (2018-04-01)

Outlier Detection Based on Residual Histogram Preference for Geometric Multi-Model Fitting
by: Xi Zhao, et al.
Published: (2020-05-01)

EXPERIMENTAL SETTING FOR TESTING THE BOND STRENGTH BETWEEN METAL ALLOY AND PEEK
by: Zhivko Georgiev, et al.
Published: (2021-08-01)

Quantized Residual Preference based Linkage Clustering for Model Selection and Inlier Segmentation in Geometric Multi-Model Fitting
by: Qing Zhao, et al.
Published: (2020-07-01)

Effect analysis of geometric parameters of floating raft on isolation performance
by: LI Shangda, et al.
Published: (2017-12-01)

ANN Laser Hardening Quality Modeling Using Geometrical and Punctual Characterizing Approaches
by: Ilyes Maamri, et al.
Published: (2018-06-01)

Selection of reference specimens for assessing the efficiency of part surface nitriding
by: V. V. Sazanov
Published: (2017-05-01)

Design of Geometrical Parameters and Kinematical Characteristics of a Non-Circular Gear Transmission for Given Parameters
by: Silvia Maláková, et al.
Published: (2021-01-01)

Experimental Studies of the Influence of Microencapsulated Phase Change Material on Thermal Parameters of a Flat Liquid Solar Collector
by: Krzysztof Dutkowski, et al.
Published: (2021-08-01)

The effect of elevated temperature and tensile force loading on the relaxation of residual stresses in surface-hardened elements of the rod structure under creep conditions
by: V. P. Radchenko, et al.
Published: (2019-10-01)

Geometric Analysis of Images for 3D Models Reconstruction
by: Rou’a Ali, et al.
Published: (2009-03-01)

System Optimization and Patient Translational Motion Correction for Reduction of Artifacts in a Fan-Beam CT Scanner
by: Wise, Zachary Gordon Lee
Published: (2012)

Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels – a numerical analysis
by: Pavan Hiremath, et al.
Published: (2020-07-01)

On the Correlation between the Geometrical Features and Thermal Efficiency of Flat-Plate Solar Collectors
by: Waldemar Kuczynski, et al.
Published: (2021-01-01)

DESIGNING OF TECHNOLOGICAL PROCESSES OF VIBRO-IMPACT FINISHING OF DETAILS FLAT SURFACES THROUGH BALL-ROD HARDENING
by: Andrey N. Leshchenko, et al.
Published: (2018-07-01)

DESIGNING OF TECHNOLOGICAL PROCESSES OF VIBRO-IMPACT FINISHING OF DETAILS FLAT SURFACES THROUGH BALL-ROD HARDENING
by: Andrey N. Leshchenko, et al.
Published: (2011-03-01)

Effect of Geometrical Parameters on Extraction Efficiency of the Annular Centrifugal Contactor
by: Yigang Su, et al.
Published: (2021-07-01)

The Residual Strength for Different Shaped High Strength Concrete Specimens at High Temperature
by: Rahel Khalid Ibrahim, et al.
Published: (2016-12-01)

Design of Ultrasonic Fatigue Specimen of MB8 Wrought Magnesium Alloy by Analytic Method
by: DENG Haipeng, et al.
Published: (2016-08-01)

Cannot write session to /tmp/vufind_sessions/sess_m5pajvsfjq9dns2694beleldk0